EVS Revo 4 & Revo 5 Roost Guards

Written/Tested By: Dominic Cimino

I am a huge advocate for wearing protective gear in motocross. I firmly believe that the better someone is equipped with safety gear, the lesser the chance is for them to experience an injury that could have been prevented. This product review is centered around something that I continue to wear every time I swing my leg over a bike; an under-the-jersey chest protector/roost guard. We have both the Revo 4 and Revo 5 roost guards by EVS on the table, and this quick review will break down a little bit about each of them in case you might be on the market for this specific piece of equipment. 

First off, EVS has been in the protective gear game for a longer than a hot minute. They stand by the company motto of “we are protection” and it shows. They make anything and everything related to keeping one’s body safe in this sport we love the most. Not to mention, one of their biggest ambassadors is the human crash test dummy himself, Travis Pastrana. The fact that the guy is still walking should be a true testament to the EVS protection line. The Revo 4 and Revo 5 roost guards are a one size fits all, under the jersey garment, designed to keep that painful roost off of your upper body. We all know the feeling; of trying to pass your buddy or some stubborn animal on a 450 that is completely hazing you. It is not fun! If you experience this scenario from time to time and are not wearing a roost guard or chest protector, god bless you. 

Both of the Revo guards share the exact same chest piece - from the color, to sizing and design. Where they differ is the Revo 5 incorporates a back protector and removable shoulder pads to round out the comprehensive upper body zone. Upon first fitment, both guards felt large on me (I’m 5’7”, 145lbs - skinny guy). I quickly found out there are plenty of adjustable straps to tailor the Revos’ to my body, so the “one size fits all” statement seems pretty accurate. Once I got everything adjusted accordingly, the roost guards felt very comfortable. They both wrapped around my chest and ribs really well, giving the “hug effect”. They allowed me to put my jersey on easily with no hang-ups, and once fully geared up, did not feel or look overly bulky in plain sight. 

For the purpose of this test, I removed the minimal shoulder pads on the Revo 5 so I could compare apples to apples to apples (Revo 4 vs Revo 5 vs Alpinestars A1 - the go-to in my gear bag). On the track, the Revo guards where very comfortable in use. They stayed in place and did not hinder any movement that I needed when on the bike. I really enjoyed the “hug effect” that they provide… I guess there is just something natural about that feeling that is hard to replicate. The Revo 4 feels just slightly more naked, due to the fact that it is missing the back piece. You will still feel the adjustable back straps against you, because they are not the most minimalistic in design. On the other hand, the Revo 5 just felt slightly better overall, due to the package being a little more complete when incorporating the backplate. To be honest, these guards are pretty much the exact same, so why would you not wear the backplate if it has no negative side effects? That is how I see it at least, the more protection the better so long as comfort and performance are not hindered. The one thing I could see posing a problem during the warmer months of the riding season is ventilation. The Revo guards do not seem to have much of it, when compared to my Alpinestars A1. After riding multiple motos in them, I did not have that big of an issue due to cooler weather at the moment, but I could definitely see that changing when we are back in triple digits. 

I plan to keep one of these in my gear bag at all times moving forward. Whether I end up using it, or I try to spread the gospel of safety to anyone near me that might need to hear it. These under-the-jersey protective pieces are a no brainer for me, as the sleek designs and comfort they provide give no room for excuses to anyone looking to stay safe. EVS continues to develop great safety products and you can view them all over at www.evs-sports.com. Thank you for reading! If you have any questions, feel free to holler at me - dominic@keeferinctesting.com

Asterisk Micro Cell Knee Braces

If you got a young little ripper like the one I have, you want to keep them as safe as possible in this dangerous sport we all love. The old rule of thumb is “dress for the crash not the ride” and this hold true even more with our children. It’s one thing getting yourself hurt, but making sure your child is wearing the appropriate gear gives us parents some piece of mind knowing that they are as safe as possible. Crashes are inevitable between the ages of 5-12 and getting the appropriate gear on them is crucial. Asterisk has made youth knee braces for quite sometime, but have recently introduced their new Micro Cell knee brace that are the first of their “Slim Line” set of carbon knee braces. 

The Micro Cell has an epoxy pre-preg carbon frame, made in Asterisk’s factory in Corona, California, with a full coverage patella cup and hyperextension stops ranging from 0-30 degrees (similar to our current Jr Cell). It is also equipped with Asterisk’s true motion hinge that gives the rider smooth/natural motion of each leg. This brace offers rigid lateral arms for the most support and lowest profile possible. The Micro Cell really makes sure all the important areas of knee protection are addressed without being too bulky for most youth riders small/skinny legs. 

My son Aden is 12 years old weighs 85 pounds, but is built like his dad (D&R), which means he is long and skinny. We have tried other youth braces in the past, but could never get the right fit for his smaller circumference chicken legs. Other braces would slip down, dig into his leg, and wouldn't get tight enough, which means they wouldn't be doing their job in case of a crash or sudden twist. The Micro Cell’s fit snugly with three velcro straps and are not cumbersome to interrupt the technique of a small rider. Having proper technique at a young age is super important because these younger years of riding are the foundation of proper technique for the future (AKA Safety). I like that there are extension stops that limit my little dudes legs that can also be adjusted by the parent as the child grows. 

After using the braces on the first day, Aden reported back that he could move his leg more freely through corners and the braces weren't as heavy (as his older style braces that he was wearing). Pinching/squeezing the bike was made easier because of the slim nature of the brace and Aden didn't come home with a chunk of skin missing, because the Micro Cell didn't dig into any parts of his legs. I also like the braces because the hinges/frame protected him from a collision at a race that he had with another rider. Another kid came into him a little hot and basically t-boned Aden in the side of the knee/leg area. The hinges/frame of the Micro Cell not only protected his knee, but kept the impact to his leg to a minimum. Some people ask me “why not just get him in knee guards”? Having this happen to Aden and then inspecting his knee/leg gave me the answer as to why knee braces are better without question. It’s added protection for my kid that needs it in a time where he most likely will be crashing the most because he is learning to find where he can push the limit and where he can’t. 

The cost of the Micro Cell is $349.00 and is a one size fits most as Asterisk can provide thinner or thicker padding to create the correct fit. Aden used standard pads and hasn't used thinner pads yet. The brace itself has held up great over the course of several months of crashing and riding, but they are fully rebuildable from Asterisk if need be. The Micro Cell’s are not up on Asterisk’s website yet, but is available by calling (951) 268-6790. If you can measure the circumference of your child’s knee and give that measurement to Asterisk (when ordering) they can ensure you are getting the correct brace and padding. This has been one of the best protective pieces I have put on my kid in the past year and I fully endorse using this product to keep your child’s knees/legs safe.    

If you have any questions about this product feel free to email me at kris@keeferinctesting.com 

Fly Lite Hydrogen Gear Set

Having been a contributor for many years at a publication (that is now worthless) as well as testing with Kris over the last two years; it’s safe to say I’ve worn many different gear brands and styles. That being said, for some reason I had never worn anything from Fly Racing until last year when I got their Patrol jacket which quickly became my favorite off-road jackets/vests of all time. After telling Kris how much I liked the jacket he said I should try a set of their gear so I ordered up a pant, jersey, and set of gloves from their Lite Hydrogen line and patiently waited for it to arrive at my door step. 

Let me preface this review with the fact that although I ride a lot of moto with Kris, I also do a lot of trail riding as well as off-road racing, so I tend to really put sets of gear through the both sides of the fence. I got my set of red Lite Hydrogen gear and one of the first things I noticed when getting dressed was the fit. I’m a little picky when it comes to how gear fits as I don’t want the LBZ look, but at the same time I don’t necessarily have the figure of a super model, so skin tight gear is almost as bad as wearing baggies. The large jersey and 32” pants contoured my 6” 180 pound frame perfectly without making me suck in my beer belly (yes, I like beer, sorry Keefer). The jersey is slightly looser than the pant, which is fine with me because I like some air between my body and the jersey. This also allows me to wear my chest protector under the jersey without looking like a football player. The jersey has mesh ventilation panels, is laser cut, and has a slightly longer tail, so you don’t look like Jason Anderson when on the track. 

Having a slightly slimmer fitting pant is also fine with me because the fabric stays contoured without being too tight and uncomfortable. Being more form fitting also doesn’t leave any baggy material to get caught on shrouds or other parts of the bike which can impede your ability to feel comfortable on the bike. The pant material although having a contour fit seems to still be able to breathe and also has a very durable knee area, which hasn’t shown any signs of breaking down yet. One of the coolest features on the Lite Hydrogen pant is the BOA system, which gives you another way to keep the pants snug. It also kind of gives you that custom fit as everyone is made different right?  On the back of the pants, along the waist line, there is a BOA reel which can be clicked out and turned clockwise to tighten the waist of the pants. One off-road reason that I like this system is that when I wear my fanny pack (yes, I’m that guy) the extra adjustment lets me keep the pants tight so they don’t slowly fall down on a long trail ride. Boom! 

The Lite glove is a minimalist glove, which for me makes it very comfortable; although it’s no secret that minimalist gloves don’t provide the most protection off-road, it works out ok for me because I am a hand guard type of guy. The palm of the glove is made from perforated Clarino material and has a reinforced thumb area which have both lasted with no signs of tearing. On the top of the hands is a spandex material, which is very comfortable, but doesn’t protect from bush and shrub slaps when off-roading. 

I’ve been wearing this gear for a few months now and to be 100% honest it has been really good for both aspects of my riding! I only thought this gar would be good when I rode moto, but it has been great when I am hitting the trails as well. The only real downfall that I’ve found is the lack of protection of the back of the glove. That being said, the gloves were never meant to be off-road gloves (Fly makes a whole line of glove options for any discipline you may ride).  With the price breaking down as follows: Jersey-$49.95, Pant- $169.95, Gloves- $21.95, I think the Lite Hydrogen gear set is a great value for the hard earned dollar that you’re going to spend. If you have any more questions about the Fly Light Hydrogen gear, feel free to reach out to me at Michael@keeferinctesting.com. 

100% Brisker Gloves

Once a year I head down to Mexico to race the infamous Tecate Enduro. The event is always the first weekend of December which means temperatures vary between 30-50 degrees Fahrenheit. Before leaving this year, Kris handed me a pair of 100% Brisker gloves and said they may come in handy at this race. They sure did! The Brisker is 100%’s glove targeted at cold weather riding while not being super bulky like a snow glove. On top of the glove is a padded, insulated soft top which creates a slight barrier between the top of your hand and the elements. The palms of the Brisker are a single layer Clarion material and the inside is a “moisture wicking” micro fiber which is very comfortable. The wrists use a hook and loop adjustable strap to keep a tight seal from the elements as well as using Tech Threads which are supposed to let the rider be able to use touch screen devices without having to take the gloves off. 

Sure enough, when the morning of the race came upon us, it was about 40 degrees Fahrenheit and my start time was at 7:43am. I got dressed and went straight for the Brisker’s and headed to the line. I’m an XL when it comes to gloves and when I went to put the gloves on I didn’t think they were going to fit at first.  Once I got my fat hands past the cuff, they went right in, fit really well, and the material inside the glove was very comfortable on this cold Mexico morning. The hook and loop strap stayed in place and never came un-done. The Brisker did an excellent job of blocking the cold weather from the tops of my hands, but I did have handguards on which helped, although I never felt a cold breeze through the gloves. The padded top, while doing a great job of protecting me from the cold, didn’t do such a great job of protecting my delicate fingers from bushes (I know they aren’t armor gloves). There were multiple times that I was slapped by a bush through the padding and it still gave me quite the sting. Once it started to warm up (55 degrees), I noticed that the palms didn’t do the best job of getting rid of sweat. When I would take the gloves on/off between special tests, the inside of the gloves stayed damp from my sweat. I’m sure it wouldn’t have been as bad if temps stayed in the 40’s, but as the temps went up, the perspiration got slightly worse. The Tech Threads are good for pressing on smart phone screens, but when it comes to swiping (either for Tinder on the trail or just to open your phone) the gloves aren’t very effective. Overall, I think these gloves are the best cold weather gloves I’ve ever used to date and I have tried a few recently. A lot of the gloves on the market are too thick and feel very bulky when using the bikes controls. The Brisker however just feels like a normal glove with some added padding to the top of the glove with extra warmth. I’d definitely recommend these gloves for cold trail rides, or even cold mornings at the track. The looks of the Brisker doesn't scream “COLD WEATHER GLOVES” as it looks “cool” enough for moto dudes. If you have any questions about the 100% Brisker gloves or anything else at Keefer Inc. Testing feel free to send me an email at Michael@keeferinctesting.com.  -Michael Allen

100% Cognito Glove Product Review

Now that the weather in So Cal is finally starting to cool down I’m now able to enjoy more trail riding time. When I go trail riding I’m almost always a handguard guy, but there are times when I’m at introductions for new bikes that don’t come with handguards (I.E. the 2019 Honda 450X). Most of the riding gear I get is moto based, which is fine when it comes to the pant/jersey, but most moto gloves don’t stand up very well to bushes and other trail riding  shrubbery/roost. This is where 100% comes in; they have multiple glove lines that you can wear depending on what type of riding you’re doing. The first pair I got to test are named the Cognito and they offer more protection than your typical moto glove. The four-way stretch material on top of the glove is very rugged, doesn’t snag on bushes, and is much more resistant to punctures. The top of the glove (on the knuckles) uses D3O® material for additional impact resistance. Admittedly when I saw the gloves for the first time I thought the knuckles looked slightly bulky (like street bike gloves) and would hinder movement, but I was wrong. The first couple times I wore the Cognito gloves the knuckle area was a little stiff but once I wore them a few times I didn’t even notice a hindrance from the added protection. The D3O® material absorbs impacts while keeping its ability to be flexible and well ventilated. This is not only handy for trail riding; I also found it helpful when getting roosted while riding moto. The wrist strap seals well, but in my opinion is a little too thick and bunches, which is slightly un-comfortable when your wrist is at its maximum range of motion (full throttle). 

When compared to moto gloves the Cognito’s are slightly thicker, but still ventilate well because the sides of the fingers are perforated. The Cognito glove isn't for your cold weather riding conditions. The Cognito glove also uses Tech Thread which is supposed to give you the ability to still use your smart phone with the gloves on. While the Tech Threads work for tapping icons on a smart phone, I found it difficult to swipe my finger on the screen and have the phone recognize it. Over the last month of riding these gloves have held up well and shown minimal signs of wear. There are five colorways available, which is nice because you should be able to find something that will go with your gear set. With a price tag of $39.50 they aren’t the cheapest glove out there, but in my opinion, for the protection and features, the price meets the gloves quality. If you have any questions about the Cognito glove feel free to reach out to me at Michael@Keeferinctesting.com. -Michael Allen

Alpinestars A-1 Roost Guard

I am always looking for maximum flexibility when I ride, which means that I don’t always dress for the crash, but instead I dress for the ride. I tell my son Aden “do as I say not as I do”. I have been actually listing to my own advice lately and have ben wearing some sort of protection under my jersey. I am also very picky about what goes over or underneath my jersey before I get out onto the track. Alpinestars has its A-1 Roost Guard, so I decided to try it for a while to see if I can live with having some protection under my jersey. Don’t get confused, as this is not your full-on, maximum protection chest protector. The A-1 Roost Guard is constructed of a poly material blend, and the front guard is CE certified against impacts and roost (the back shell is not). However, the back shell is removable, and the whole shell is completely perforated to allow airflow through to your body. The shoulder pads are removable, and the A-1 comes in combined sizes M/L and XL/XXL.

I have been testing the A-1 Roost Guard with the complete shell intact for a while and found it to be very comfortable under my jersey. Although it is not the lightest under protector I have tried, its mobility won me over as it allowed me to move freely on the bike without feeling like my upper torso was welded together. Once I got used to the complete shell, I removed the shoulder pads and back shell and rode with it like that for several weeks. This quickly became my favorite setup, as it almost felt like I didn’t have anything on. Adjusting from full shell to front shell only is super easy with the integrated Y-strap system.

I was skeptical on the sizing I received (M/L), but the A-1 guard is extremely adjustable and fit snugly around my torso. I also appreciated that the soft Biofoam shoulder pads do not stick out or make your jersey protrude outward when riding. I did get a little warmer when wearing the A-1, but it wasn’t so bad that I needed to cut holes in my jersey or needed to rip my jersey off immediately after a long moto. Even though I am not the best example of, “Dress for the crash, not the ride,” I appreciate a good roost guard that offers flexibility and enough protection/roost deflection for my taste. At $119.95, the Alpinestars A-1 is a great buy with its multiple configurations and is comfortable enough for me to wear year-round. It’s offered in black or white colorways and is available directly from alpinestars.com. 

Seven MX Zero Compression Pants

Take a look at any professional football game, basketball game, or marathon starting line, and you’re bound to see them: compression wear. Tight sleeves, knee-high socks, full-length leggings in neon colors that seem to be on nearly every competitor.

The claims on compression gear are impressive: Manufacturers say compression garments can speed recovery, increase blood flow, and therefore, improve athletic performance. But what about in motocross? I have used compression type garments in the past with great results. Is it actually working or is it a placebo effect? Honestly I can’t sit here and tell you the science behind all of that, but I can tell you what I feel when riding with Seven’s new Zero Compression Pant. 

Seven MX has introduced their Zero Compression Pant, that is an athletic compression fit, that is said to hold muscles tight and help reduce unnecessary muscle movement or shaking, that can result in loss of energy. Seven also claims that muscle compression also promotes blood and oxygen flow which aids in quicker muscle recovery, allowing for muscles to work at a higher rate for longer periods of time. The Zero pants feature a moisture wicking performance material that is said to pull moisture away from the body to keep you cool and dry. Stretch mesh panels in the bodies high heat zones is said to help to regulate body temperature. Seven also incorporates silicone dot gripper tech print in key areas for added grip on knee braces and inner pant liner.

Ok, so now that you know a little about the product, how does it work on my old motocross carcass of a body? I will tell you that some of these claims that compression wear helps blood flow are found to be true for myself. Having some type of compression on my limbs (while I workout or ride) seems to help lessen muscle fatigue (for myself) and also keeps things held together nicely when I am out pounding motos. The Zero Compression Pants fit snugly and acts like a thin layer of support for my legs. I like the fact that my knee braces do not slip throughout the day due to Seven’s silicon dot gripper material. The Zero Compression Pants are also thin enough that they don’t heat up my legs on a hot desert day and can actually cool them down when I start to sweat. The biggest benefit, that I have felt, is that my legs do feel a little more secure and fresh at the end of a long test day. Is it the compression? Is it a placebo effect? I don’t know, but to me it doesn't matter because it helps my legs feel fresher and more secure if you will. If you don't like wearing long motorcycle knee brace socks then having some type of compression pant under your riding gear is a must. I usually wear a Leatt or Asterisk knee brace pant, but I have been resorting to the Seven Zero Compression Pants because it’s simply less material to deal with. Although I do like that the Zero Compression Pants do not allow your knee braces to slide down, the Leatt and Asterisk pants do make it easier to put your riding pants on (due to the fact that the Asterisk and Leatt compression pants fold over your knee braces, which doesn't allow the velcro straps, of your knee braces, to get hung up on your riding pant liner). 

If you haven't tried compression type products yet and are old like me, maybe give these Seven Zero Compression Pants a try. They aren't some miracle pant, but they do feel nice under your riding gear, helps your legs stay fresh, keeps your legs cool, and secures your knee braces without having to have excess material. The Zero Compression Pants are $89.00 for adults (S-XXL) and $80.00 in Youth (Y24-Y28) sizes.   

100% iTrack Gloves Product Review

What? 100% makes gloves? Yes, that’s right, not only do they make goggles, but 100% has been in the glove game for a while now as well. I am a big stickler when it comes to gloves, almost borderline a pain in the ass, so I needed to see if these iTrack gloves from 100% was worth my time. The 100% iTrack gloves feature a stylish embossed slip-on cuff application for ease and comfort, a seamless mesh top hand that is said to improve fit over knuckles and increases airflow, mesh finger gussets are placed to enhance mobility and wick away moisture, a thumb overlay aids in reducing blisters (AKA Yamathumb), a perforated single-layer Clarino palm aids in comfort while reducing bunching, silicone printed palm/finger graphics are placed accordingly to try and improve palm and lever traction, and finally an integrated tech-thread keeps you connected with your devices so you can “like”, “swipe right”, “facebook", “snapchat”, “tweet”, or take a “selfie” on the track or trail.

I am a big fan of slip on style gloves and prefer them over having a velcro cuff closure system. Once I put the iTrack gloves on I noticed they were a little tighter in the palm area than I would have liked, but stretched out enough within the first ride. I am normally a size large in gloves and once the iTrack’s were broken in they felt like a large. However, when new they feel like a medium, so be forewarned it will take some break in. The materials that 100% uses are extremely comfortable, breathable, and soft to the skin, yet provided me with enough padding in my palm to shun away blisters from a long day of testing. This is a minimalistic glove so just know that there is zero knuckle protection from roost or rocks, but in this case (with gloves) comfort outweighs protection for me. (We will be testing another set of 100% gloves that does in fact have knuckle protection, in the coming weeks). 

I did notice that the neoprene cuff was a little shallow as it barely covered up the end of my palms/start of my wrists. The cuff never slid down or allowed dirt inside my palms, but the feeling of it being shallow was more annoying to me than anything. The durability of the glove is something that I will have to praise. I beat the shit out of the iTrack’s and usually I rip the seams near the thumb area almost constantly with other lightweight gloves, but the iTrack has held up and proved to be a very durable minimalistic glove. Very rarely do you get a thin glove that doesn't come busting open at the seams, so this was nice to finally see. I have spent over one month with these gloves and have yet to find a failure in the sewing. (Just know that one month of my riding is equal to around 4-6 months of normal blue collar dirt bike riding). This to me is almost as important as the comfort of the glove. I hate it when I am at the track, in the middle of the day, only to find out my glove is split wide open near the thumb area. I did manage to try out the integrated tech-thread and in fact it does allow you to text and send with zero issues. I didn't swipe right, but I did manage to text the wife that I wasn't coming home, to do the honey do’s, because I was still riding. 

For $29.50 the iTrack is a good buy, but just make sure you know that they do fit a little tighter (in the palm area) than some other lightweight gloves on the market. Just like boots, some gloves need break in time and these iTrack’s definitely need that “break in” period. 

Bonus Tip: Because I know I am going to get a crap ton of emails asking me “ Yeah Keefer, but can I wear these gloves with any gear set”? My answer is “yes, you can”! Why? Because 100% only makes gloves and goggles and it’s still within the gear laws (if you abide by them) to wear 100% gloves with any gear company. If 100% starts to make gear than you must wear 100% gloves with 100% gear only. Until then have a ball and buy some 100% gloves to go with your Thor gear

Leatt GPX 5.5 I.K.S. Steel Pant And GPX 5.5 Ultraweld Steel Jersey

For a few years Leatt has been getting deeper into the high end gear market and I’ve been lucky enough to test a few different lines. A while ago Kris (Keefer) gave me a set of 2019 GPX 5.5 gear and told me to put it through the testing ringer. Since then I’ve been wearing this set exclusively whether it be moto or off-road and have been loving the looks of the new colorway as well. I wanted to give you all quick first impression of the gear, but look for a more in depth test in a couple months, when I get more miles on the 5.5 pant and jersey.   

The fit of the Leatt 5.5 gear is top notch, not being too tight or too baggy. Sizing is correct and there are no surprises when putting on any of the Leatt pieces. The jersey is made out of a lightweight, vented and stretchy material. In the armpits of the jersey there are multiple vent holes to help keep hot spots to a minimum. The torso and arm area are athletic fitting without squeezing the body and has just enough material so there is a thin layer of ventilation between your body and the jersey. One thing I didn’t care for on the jersey were the cuffs. The taped seams that are used on the welded cuffs are a rubbery plastic material that came un-bonded from the jersey material itself and just hung off. When riding off-road the jersey got some small snags from branches, but they never grew larger than just a small snag. The jersey is very comfortable, soft to the skin, and breathes well when you start to sweat.

The I.K.S. steel pant, like the jersey, has a great fit. It is an athletic fit from your waist all the way down your legs without being too tight. I have zero issues with the pant stretching comfortably around my knee braces, nor does it hinder my movement on the bike. The pant is made mostly of a four-way stretch/Rip Stop material so while it looks tight, it’s really just comfortable and form fitting. Leatt uses its Internal Knee Brace System (I.K.S.) on the inside of the knee area to prevent excessive knee brace wear or tearing, which it did because the knee area have held up great. On the original set of pants I received I did have an issue with the zipper. The first ride out, the zipper came off the bottom and both sides of the zipper were disconnected. I was able to get it re-zipped, but then when zipped back up, the zipper below the top came undone and could not unzip. I contacted Leatt and they sent me out a new set of pants and I never had this issue again after several uses. Looking back, I don’t think this is a flaw in the pant, I just think it was a fluke malfunction that happened. However to keep up with the transparency here at Keefer Inc. Testing, I still wanted to let the reader know everything that has happened with the Leatt set of gear. If this happens to you please contact them and they can remedy the issue for you. One aspect about the pant that really stood out to me was that in some situations they had a hard time staying up. I’d like to say it’s because I’m so skinny, but unfortunately that isn’t the case. When accelerating out of ruts that have acceleration bumps, the stretch material on the butt of the pants (or yolk) gets pulled down. Coming out of corners with acceleration chop can make the pant pull down slightly throughout the duration of a moto. This obviously didn’t happen if the track forced me to stand a lot, but when there was a lot of sitting and chop it was noticeable. The best way I found to combat this was to tighten the buckle a little tighter than I normally would. The adjustable ratchet latch always worked well as well as the zipper (aside from the first set of pants I previously mentioned).  

Overall, I think Leatt is a real contender in the high-end gear market and will only improve over time. I will keep putting more time on the 5.5 set of gear over the next few months and report back with all of my findings. Feel free to reach out to me at Michael@Keeferinctesting.com if you have any questions regarding the Leatt 5.5 gear set. 

-Michael Allen

2019 Fox FlexAir Pant And Jersey

Fox has been a staple in the motocross world for as long as I can remember. Being a little seven year old high desert kid I can still remember seeing my heroes wearing Fox Racing gear. I used to ride around my house, on my YZinger, with my trusty Pawtector’s on pretending I was racing the Coors Light Supercross Challenge at Anaheim Stadium. Fast forward 35 years and Fox is bigger than just motocross, but have stayed true to their motocross heritage. The FlexAir is Fox’s high performance, race driven set of gear that you see top riders like Ken Roczen, Ryan Dungey, and Austin Forkner wear every weekend. I have reviewed the FlexAir set a couple years ago, but I wanted to re-visit the new updated version to see how it performs on my body and track. 

The FlexAir pant utilizes Fox’s RAP (Rider Attack Position) construction for a precise fit on the bike, a rigid waist system to firmly hold the pant in place, a four- way stretch TruMotion main body fabric that is said to provide increased mobility on the machine, laser perforation in key areas for enhanced airflow, a dyed main body fabric with premium heat transfer logo treatments, the elimination of internal liner is said to reduce weight and heat, slim knee construction provides a sleek performance fit over braces or guards, a double layer knee system for durability against knee braces and guards, critically taped seams to help reduce chaffing, and there are hip pads that are available, but sold separately. 

The FlexAir jersey incorporates a lightweight construction for complete freedom of movement, new for 2019 is an athletic fit sleeve with laser perforation for enhanced airflow, a TruDri fabric provides a soft, lightweight fit as well as moisture wicking, a dyed main body fabric with premium heat transfer logo treatments, a bonded collar to reduce chaffing, and lastly a bonded stretch cuff provides a slim athletic fit.

Now that some of the details are out of the way, here are a few things that I wanted to share with you all about the Fox FlexAir set of gear: 

The Flex Air pant is an athletic style pant that fits tight/snug over my knee brace/knee area, but remains super stretchy. I am able to move around on the bike freely and less restricted than other non athletic type pants. The word “snug” doesn’t have to mean “restrictive” or “uncomfortable”. Having a snug fit against your body can help make you feel streamlined while riding. Think of bicycle racers and their skin suits they wear for time trials. They wear tighter fitting clothes to cut through the air when tucked into their attack position. Motocross is not that much different, except we are flying through the air and going much faster speeds. No media testing outlet ever really talks about this, but when going back and forth between athletic and non-athletic cut gear you can feel a difference in drag (especially at speed). The updated closure system is like having a half belt around your waist with Fox’s two-piece design. When you cinch down on the buckle it feels like the waist area is firmly secure all the way around your waist, not just the front area. When I move around on the bike with the older style FlexAir pant, at times, the pant slipped down and this led to my jersey untucking as well as having to deal with unwanted pant slippage. However, with this closure system my jersey stayed tucked in and the FlexAir pant stayed around my waist where it belonged. The taped seams inside the pant are great and I wish every manufacturer would do this because you never have get snags when pulling the pants up. Not only do taped seams help when putting the pant on, it helps when moving around on the bike and keeps the pant lightweight feeling. Fox’s “RAP” system really does work and is not just a gimmick. The FlexAir pant bends with my natural motion on the bike and doesn’t bunch up near the leather of the knee area when I am seated on the machine. Not to mention that the leather knee is extremely durable for a minimalistic type pant. I have endured a few weeks of durability testing with the FlexAir pant and it has held up well against my CTi knee braces. The FlexAir fit is true to size and has a little extra room with how stretchy the pant is in the waist. So if you're a size 33, a 32 will work just fine. I usually wear either an Asterisk ZeroG pant or Leatt knee brace pant and the fit isn’t too snug around the waist. 

The FlexAir jersey has one big change to it and that is with the sleeve/arm portion of the jersey! If you are looking for ventilation look no further than this jersey right here! it is THE BEST on the market (besides the Shift Blue Label jersey) with ventilation and a lightweight feel. No other jersey compares to it! The FlexAir jersey felt like it had an overall shorter cut length arm when on the bike, which I approved of, but if you're a taller rider (6’2 and up) you may notice a shorter overall sleeve length than normal. The perforated sleeves ventilate insanely well, but when sweating, it does turn the material on the sleeve kind of crusty once your sweat dries. The feeling isn't a harsh or course feel to the skin, but it does change once you have started to sweat. The FlexAir jersey is athletic cut, but not skin tight like other performance-based jerseys. Hey all you bigger dudes out there!!!! If you're a little overweight and have a belly, don't fret, the FlexAir jersey will not show ALL of your curves in your stomach. I have a couple fat rolls and it’s not even noticeable, so don’t stress! The updated cuff also doesn't get stretched out like the old FlexAir jersey over time and although it is somewhat tight when sliding over your hand, it’s very comfortable when riding (and isn't restrictive). The FlexAir jersey feels so light, it’s almost like wearing nothing, so be forewarned of roost if you’re a non-chest protector kind of guy. It’s super thin! Most underprotector’s work well with the FlexAir jersey because it is so stretchy. I had zero problems with movement on the machine with an underprotector on. Durability of the jersey is superb, but DO NOT go woods riding with this jersey and expect it to last. Tree branches will rip this jersey! This is a motocross only type of material.

The cost of the 2019 FlexAir pant is $229.95 and $99.95 for the jersey. This is a steep price, but you're getting what you pay for with the Fox FlexAir stuff. It has proved to be durable for a minimalistic type of gear and Fox offers a wide variety of colorways to keep anyone happy. If you’re looking for ventilation along with mobility on the bike, this set of gear is hard to beat. You can check out the complete line of Fox products over at foxracing.com.

If you have any questions about this test please feel free to email me at kris@keeferinctesting.com 

O’Neal Hardwear Rizer Pant And Jersey

O’Neal has been making gear since 1970 and I think Doug Dubach has been wearing it as long as I have been alive! To be completely honest with you, I haven't been a huge O’Neal fan in the past, but the last couple years the gear has grown on me and has really improved. I really wanted to get O’Neal in the testing loop and get their latest 2019 offering some quality time on the track. I decided to try the Hardwear Rizer gear, which is there their flagship set of gear. O’Neal has a 2-in-1 philosophy that allows the buyer to choose two different colored jerseys with each set of colored pants. O’Neal offers three sets of pants and six jerseys in the Hardwear Rizer line. Yes, mix matching isn’t my type of program, but it is cool that O’Neal offers this for the blue collar guy who can’t necessarily afford two full sets of gear. This way he or she can change it up with a fresh jersey and get away with the same pair of pants. Basically you're purchasing one and half sets, which is a great way to save some coin.  

The Hardwear pant is built very tough with triple stitching and heavy-duty type fabrics. However, it doesn’t feel super heavy when putting the pant on. The Hardwear pant has a 360-degree adjustable Velcro belt that allows a size-32 pant to fit waist sizes from 30 to 34. It allows you to cinch your pants as tight as you want for a wider, more customizable fit. There is a full-length mesh netting inside the pant, which is rare to see these days in the premium motocross pant market. O’Neal stitches a soft material around the entire leg cuff so your knee brace straps do not catch when putting the pant on. There are a lot of subtleties included in the Hardwear pant that you may not appreciate until you wear them. The Hardwear pant has stretch spandex panels, accordion knees and flexes enough on the bike where it doesn't hinder your movement on the bike. The Hardwear pant is not an athletic cut pant, but I like that the pant is tight enough around my leg that it doesn't give you too much access material when stretching out your leg through corners. There is nothing more annoying than having a pant that is baggy and ends up getting caught up on the shroud when lifting your leg high through ruts. Did I mention that this Hardwear pant is tough? I had a long stretch of testing where I wore the pant everyday and the yolk of the pant has not shown any signs of wear nor is the leather knee started to burn or tear. My CTi knee braces are no match for the leather of the O’Neal Hardwear pants.

The Hardwear jersey features a moisture-wicking material, an extended tail made of mesh with silicone print (to keep the jersey tucked in), and a flexible collar with a tag-less label. Like I have mentioned in other tests, I really hate when jersey’s arm lengths are long or baggy. This isn't 1992 where we need to look like we are wearing parachutes. I love the arm length of the Hardwear jersey and the overall feel of the materials are very soft to the skin. The Hardwear jersey also ventilates fairly well (better than the pant) and is also more of an athletic cut fit than the pant, but it’s not so tight where you see every little muscle or fat roll on your torso. The collar is nicely placed on your neck and doesn’t allow dirt to get down the front or back of your body. The Hardwear jersey has a simple clean look and has the correct sizing, so you don’t need to worry about getting a larger sized jersey. 

Overall the O’Neal Hardwear pant and jersey is some of the most underrated set of gear available today. For some reason I feel like the perception around our industry is that the O’Neal brand isn't “cool”. They may not have the marketing money that some of the other brands do, but to me I feel like it’s one of the most cleanest sets of gear out for 2019. To me, that makes the O’Neal brand “cool” and the fact the stuff is worth the $174.99 and $54.99 price tag the pant and jersey come with. If there is something that I could complain about, it would be ventilation. The pant ventilates decent, but definitely isn't the most breathable pair of pants that I have worn. I will be trying O’Neal’s Mayhem Lite gear before the summer’s completely over to see if that set of gear has more ventilation for my desert rat ass. If you're looking for a set of gear that is durable, looks clean, and fits well go visit oneal.com and check out their line of Hardwear gear. 

Alpinestars Supertech M10 Helmet

In the past when you decided on wearing Alpinestars gear you were stuck wearing another brand of helmet. That is until now… With the release of the all-new Supertech M10 helmet, Alpinestars is now in the premium helmet market world. The Supertech M10 helmet is the result of years of intensive study, development/testing, and after riding in it for almost two months I have learned a lot about its character. 

The first thing you immediately notice about the M10 is its lightweight feel. Constructed from a carbon fiber shell, a medium M10 weighs only 1260 grams – that’s 2.78 lbs. – and is lighter than most helmets I have been wearing lately. It’s surprisingly light when you pick it up and you just about forget you’re wearing it once out on the track, which translated into less neck fatigue. Weight isn't usually a big factor for me, but after riding with the Alpinestars M10 for a while now I surely can appreciate the feeling on longer motos. The cool-max interior liner is really nice too, especially in the dez. California is atrociously hot in the summer months, but that hasn’t stopped me from continuing to pound out motos in 100 degree weather. When you’re sweating your nuts off, the helmet’s interior is wicking it away and soaking it up. Sometimes helmet liners can become slightly abrasive/course feeling once all the moisture dries up, but the M10 still leaves you with a soft feel to it and will not feel like a Brillo pad when putting it on your head. 

Ventilation was an important focal point in Alpinestars R&D process of the M10. Immediately when I went out on the track I noticed this helmet flows a lot of air, noticeably more than other off-road helmets I have tested lately. Alpinestars heat mapping tests have resulted in specifically designed ducting which produces a positive flow into the helmet over and around the rider’s head, leading to improved comfort while riding and reduced onset of heat stress in extreme conditions.

The visor design of the M10 is also a very innovative part of the ventilation system, as it’s profiled to direct airflow and acts as a channel to concentrate and smooth the flow into the shell. The Supertech M10 interior liner design is formed to optimize airflow channeling around the rider’s head before exiting through rear exhaust vents. The visor design also features a patented mounting/release system that sits flush with the helmet’s shell. There are no screws keeping it in place. This makes the helmet look even more custom and seamless. The visor snaps in and stays put until the right level of resistance causes it to release and detach from the helmet to mitigate any rotational forces that would otherwise be transmitted to the rider’s head, brain or neck in the event of a crash.

Cudby Photo. 

As far as the safety aspects of the M10, the carbon shell features a multi-composite combination of 3K high-density carbon on the outer layer, a unidirectional carbon composite layer (which gives greater radial strength around the shell, preventing compression but allowing controlled deflection for reducing transmitted impact energy), and an aramid fiber layer that provides critical penetration protection. This multi-compound shell gets surrounded by an inner four-part multi-density EPS liner, which soaks up impact forces dissipated over the outer shell, and it all works in conjunction with its Multi-Directional Impact System, or MIPS. 

MIPS and similar technology is becoming more common these days in helmet construction. MIPS is a system that uses a low-friction slip layer between the comfort padding liner and the EPS layer, which allows one to move slightly independently of the other to dampen, redirect and reduce forces to the brain and neck, helping to reduce the chances of a concussion. Key word here is “helping”!! This system will not prevent a concussion. There are many types of “helmet technology" in the our world, so study up and decide on which one you believe in the most. Again, just like neck brace technology, it’s up to you to take in the scientific information and decide for yourself which one you trust in the most. 

Other benefits found in the M10’s shell and EPS liner are a patented A-Head fitting height and adjustment system as well as hydration system compatibility. The A-Head system allows the helmet to be tuned exactly to the riders preference for the height and angle at which the helmet sits on the head. With a micro-adjustable pad that is connected to the helmet’s inner shell, it is possible to raise or lower the helmet fit and also, to tilt the helmet forward, or backwards. It’s easy to use and adjust, but I did find that I needed to use thicker cheek pads to fill in the area inside the helmet. I am a size medium and the standard cheek pads are way too thin for my skinny cheek bones. Going to 40mm cheek pads gave me a snugger fit and helped with feeling too much side to side slop on my head. For you off-roaders out there, the hydration pack compatibility is also a very cool feature, but I am going to let my tester Michael Allen handle those duties. There’s a channel on either side of the chinbar behind the cheek pads to run a tube from a Camelbak or similar system. It’s cool that Alpinestars includes some “off-road” into their lids! 

Each Alpinestars Supertech M10 helmet size comes with its own dedicated proprietary carbon shell size and EPS liner construction. This not only ensures that riders have a correct fit, but most importantly improves protection and the effectiveness of the helmet in case of an impact while optimizing weight reduction across the size range. The Alpinestars Supertech M10 is both DOT and ECE certified, comes in six different sizes from XS to XXL and will set you back $649.95. That is in the range of most premium helmets out there in the market today.

The looks of the helmet is something that has grown on me honestly. I wasn't on board with the looks initially, but after riding with it and seeing photos of myself with the M10 on, it looks attractive enough for some “Best Dressed” awards come 2019. I will continue to wear the Supertech M10 and get back to you all on a long term “Living With” test soon.     

Atlas Air Neck Brace Product Review

Neck braces…This is a tough topic in the world of motocross right? Neck braces are almost like a form of religion. You have a bunch of people preaching to you on how they believe in what “they” (neck braces) can provide for you, but it’s something that is up to you to fully believe in. Or maybe it’s something that you choose not to believe in at all? I can tell you that I was somewhere in the middle between those two. It wasn't that I didn't “believe” in the technology as much as it was more of a comfort thing for me when I rode with one. I felt too restricted with a neck brace on and it hindered my technique on the bike. I felt like a robot, that was so stiff on the bike, that I immediately was an anti neck brace guy! Fast forward five years and I got pressured to try an Atlas Air neck brace again by my good friend Steve. I warned him beforehand that having me test a product that I didn't care for several years ago could be dangerous as I am a no bullshit kind of guy when it comes to evaluating products. Steve agreed and now here we are typing out this evaluation. However, sometimes getting pressured can be a good thing and in this case it was good, because as a test rider I needed to have an open mind to products that may or may not have been “acceptable” several years ago. Why? Because just like dirt bikes, products can evolve and get better over time. Well to my surprise the Atlas Air neck brace did just that, it evolved and got better. 

Before I get into the meat and potatoes of why the Atlas Air is a better neck brace, what exactly is the technology behind this product? The Atlas Air is made up of a flexible polymer construction that is tough and impact resistant that is ideal for multiple impacts. The flexible nature of the material is designed to slow down violent impacts in an effort to spread out and reduce impact forces, rather than coming to an abrupt stop.The Split-Flex Frame design allows the rear of the brace to mimic the natural movements of your shoulders to provide maximum comfort and mobility (in dirt bike riding terms, that means while riding you're almost able to not feel like you're wearing anything). Each Atlas Neck Brace sits around your spine and sternum, transferring impact forces to the bigger muscle groups rather than directly on the spine and sternum, while increasing surface area contact with the body to dissipate forces more efficiently. Chest suspension keeps the head in motion during a longer period of the impact, while promoting tuck-and-roll ability during an accident (If you know Ryan Hughes rants, this is something he thought neck braces lacked). Unique leaf spring style design provides 30mm of chest suspension to help slow down and reduce impact forces. Each chest support can operate independently, allowing impact forces to be absorbed strategically and effectively. Each Atlas Brace is the smallest overall size compared to the competition, but is claimed to contact your body 27% more than the competition, making it smaller, and bigger if that makes sense? The increased surface area contacts the body to help spread out impact forces, with the intent of making their effects less noticeable and/or helping to potentially prevent secondary injuries. Previously Atlas used rear tethers that used an internal braided steel cable for strength. Now, after three years of development Atlas has now gone wireless! The new tethers use a specifically formulated rubber compound co-molded to custom machined aluminum axle nuts. This unique rubber compound provides more strength and longevity, that withstand a ton of cycle testing. Each Atlas Air neck brace features two height adjustments. Tall pads are included in the box and make fit easier for longer necks, smaller helmets, and/or other needs. I tried on several helmets (6D, Arai, Shoei, Fox, Fly, Bell) and all gave me the same amount of head movement/mobility. Aluminum Smart Mounts on the back of each Atlas Brace provides the rider six possible settings to find tune the fit around your chest and back. The reversible design can move the back supports forward or back, and an internal spline system provides a -10, neutral, or +10 degree micro adjustment to fit various body shapes as well. 

Now let me start off by saying that it’s up to you whether you believe in neck brace technology or not. I am not a preacher and can’t force you to believe in a certain technology, but I can give you facts on what it’s like to ride with the Atlas on for several, long test days. After studying/reading all about the old technology versus the new technology, I can say that I “believe” that there are some safety advantages to wearing a neck brace. I had the Atlas Air fitted up with the help of Canadian legends Brady Sheren and Ryan “The Newf” Lockhart and they gave me a brief tutorial on the Atlas Air. After the tutorial I was off to ride my first moto with the neck brace on. One important piece of technology (that I really like) that has evolved on the new Atlas Air neck brace is the material consistency and how flexible it is. The older neck braces weren't nearly as flexible and that was a big red flag for me, especially in a crash. You can bend each end of the Atlas Air neck brace and it snaps back to the original shape much easier than older models I have ridden with. Another complaint I had with older neck braces is that I couldn't look far enough ahead of me without feeling restricted. The Atlas Air gives me enough freedom that I didn’t really notice it was on. Impressive! The only part that made me think that I had a neck brace on was that the straps (that hold the neck brace down) rubbed me a little under my jersey. I tried not wearing the straps, but the Atlas neck brace moved around on me too much when I rode. I tried the “X” strap that they also offer, but that was too much strap against my skin. Another option is to wear the strap over your jersey, which I refuse to do because of looks. The Atlas Air is also very lightweight feeling at 580 grams and that feels like nothing when motoing down. I had zero complaints with my neck mobility while riding, but you will notice the chin bar of your helmet will hit the front of the neck brace while your BS’ing with your buddies in the pits. This isn't really noticeable while riding, but it’s something that I felt when at a standstill. Each contact point of the Atlas Air is soft against your body and not at one moment did I feel an uncomfortable feeling. 

If you are a chest protector wearing rider don’t fret because the Atlas Air does comply with a number of different chest protectors. At my disposal was a Fly Revel, Alpinestars A1, A4, Thor Sentinel, Fox Titan, Pro-Frame, and even an old HRP Flak Jak! Yes, I still have one of those! I did prefer wearing the Atlas Air with a lightweight roost deflector versus a full chest pro because I felt less bulky and could move around on the bike better. However, this is more of a chest protector feeling than a neck brace issue. 

So if you haven't worn a neck brace in a while and are “on the fence” about wearing one, like I was, give it a try because you’ll be shocked on how comfortable the Atlas Air actually is. I was so impressed by how comfortable it was that I have decided to do a full neck brace shootout, come this winter, to see if the others are as good as this Atlas Air. 

Since I am no BS kind of dude and I can almost guarantee you're reading this asking yourself “yeah, but will he wear a neck brace now that he can actually stand to wear one”? My honest answer to you is that I am going to “try”. I have been wired one way for so long (on safety equipment) that I am going to really give it a conscious effort to start wearing the Atlas Air neck brace more when I ride. It doesn't bother me when I ride and I am going to educate myself more on neck brace technology for future tests, so why not wear one? The lack of comfort is not stopping me anymore, so I am going to give it a go. Will I wear it 100% of the time? Probably not, but if I start to wear it more and the technology becomes something that I “believe” in fully you will see me at the track with it on. Until then all I can do is tell you that if you do believe in neck brace technology, the Atlas Air neck brace is the best neck brace I have tried to date. The cost of the Atlas Air is $329.99, comes in three sizes, and six different colorways. You can check the complete line of Atlas neck braces over at atlasbrace.com.

Rip Clear Moto Goggle Lens Protection Product Review

If you could pick out one annoying thing about getting your gear ready, what would it be? For me it’s changing goggle lenses; although some goggle brands (like Oakley and Scott) are easier to change than others, I still never look forward to installing a new lens. Well Rip Clear makes protective lenses for just about anything that needs clear vision, from Go Pro’s, goggles and even cell phone screen protectors, Rip Clear has something for everything. They reached out to Keefer Inc. Testing to see if we would be interested in trying some goggle lens protectors and since Keefer has watched me fumble with lenses multiple times he sent them my way. In the pack of lens protectors there are two universal fit goggle protectors, two wet wipes, one micro fiber cloth and two dust removal sheets along with step by step instructions. To be 100% honest, my first time installing a protector I messed it all up and had to junk one before figuring out the whole process and fitment. Seeing as these are universal fit, depending on the goggle, you may have to trim the sides to fit between the tear off posts on your lens (at least I did on the Scott Prospects). Once the protector was trimmed I made sure the lens was perfectly clean and carefully installed the “Rip Clear” following the instructions closely. 

One thing I noticed was that I had to be very careful making sure the edges were all the way down and to make sure the bubbles were out from under the protector before riding. If there are any bubbles or a lifted edge and you go out for a ride, it collects debris and makes the high spots noticeable in your field of view, which can be annoying for some riders. If everything is installed correctly you can ever so slightly see the edge of the protector but not enough to be bothersome. The reason Rip Clear started selling goggle lens protectors is because no one likes changing lenses all the time (and it’s expensive). These can make your lenses last longer and are also claimed to make the lens stronger (although I never tested the theory). After some time with the Rip Clear protectors I have to say they are definitely more scratch resistant (especially in the Costa Rican mud where you may or may not have ran out of tear offs, thus forcing said rider to have to wipe the lens with muddy gloves) than your bare goggle lens and I haven’t had to change lenses as frequently. After some use and abuse they start to peel up on the edges and that’s when it’s time to replace them. You can just take off the old one, clean the lens and install a new Rip Clear. While the outside of the lens stays much more scratch resistant, the inside is still the standard  lens. 

 I noticed that after being able to use my lens for longer durations of time, the inside of the lens really starts to take more of a beating (especially in dusty conditions). If I had to put a number on it I would say that a lens lasts 1.5 to 1.75 times longer than not having a Rip Clear. So depending on how much a lens costs for your goggle (anywhere from $10-$40 nowadays) a set of Rip Clear Lens protectors ($20 for a pack of 2) may be worth the investment for you to get a little more life out of your lens (plus you won’t be cussing at your goggles or your wife and changing lenses as frequently). I would say my main gripe about the product is that it’s slightly difficult  to get the protector on perfectly and have no bubbles between the lens and protector. As of right now Rip Clear only offers a universal protector that fits between your tear off posts, but after talking with the company they plan to release a few goggle specific (for the more popular models) protectors soon, that will have holes for tear off posts and reach further towards the edge of the lens. The company let me know that as long as there is a demand for something that needs a protector, they will be more than happy to make it. I think for more hardcore moto riders this may not be the ideal product because let’s be honest, some moto riders are divas about field of vision and may have more money than your average blue collar off-road rider. I for one come from an off-road background and I can really see a need for making lenses last longer, especially when conditions get nasty. Feel free to reach out to me if you have any more questions about his product at Michael@keeferinctesting. Or check out Rip Clear at ripclear.com. 

Make sure the lens is clean and dry before installing or bubbles might form. 

Answer Racing Trinity Pant And Jersey Product Review

Yes, I know that we are in 2019 gear season, but sometimes there is a set of 2018 gear that goes underneath the radar. The Trinity line of gear from Answer Racing to me is one of the most underrated sets of gear there was in 2018. I like an athletic fit that is stretchy, ventilates well, is lightweight and that is exactly what the Trinity pant and jersey is. I wanted to get you all some on the bike details on a set of gear that may have gone underneath your 2018 gear radar as well. 

Some of the key features of the Trinity pant are:

– 320 denier multi-weave 4-way stretch nylon knee panels.

– Durable, 900 denier poly seat panel.

– Drum-dyed and de-bossed leather inner knee panels.

– Interwoven aramid inner leg heat barriers.

– Mesh lower leg panel allows for unobstructed air flow.

– Adjustable internal waist fitting system.

– Integrated knee and thigh TPR system with mesh-air flow panels.

– Laser cut ventilation panels.

– Strategically engineered stretch channels add support without limiting flexibility.

– Double and triple stitching throughout. 

When you put the Answer Trinity pants on you will notice the snug yet stretchy nature of the panels and that it contours to your legs nicely. The Trinity pant fits snugly over my knee brace/knee area, but still remains super stretchy for me to move around freely on the machine. The Trinity snap/button closure system is a nice touch and has been easy to get in an out of, but never has failed on me while riding. When I move around on the bike the Trinity pant’s rear yolk panel wasn't so stretchy that it pulled my pants down and let my jersey escape. The rear of the pant stayed in place and kept everything that I wanted, tucked in. I also really like how light weight this pant is when I ride, especially when it is baking-balls-hot here in the desert. The pant ventilates well enough where I can feel a slight breeze in key areas when I am putting in my long motos on the track. The best feature of this pant is how durable it is for a minimalistic design and how thin the material feels on your body. I have hit creosote trees, had violent roost hit me, took some diggers in this stuff and it has held up very well without tearing. The seams stay in tact and that leather inner knee panels are very resilient.   

It also should be noted that the Trinity fit is true to size and has a little extra room with how stretchy the pant is in the waist. So if you're a size 33, a 32 will work just fine. It is a little tight in the crotchial region however and will show your man goods off a little more than you would like. No you will not have to worry about your fat roll busting out of the pants so you're safe there! 

Some key features of the Trinity jersey are:

– Strategically located laser cut ventilation holes.

– Minimalistic, spandex stretch neck panel.

– Articulated panels in targeted flex zones.

– Lightweight, athletic fitting body form.

– Ergonomic shaped front panel minimizes bulk while in the riding position.

– Spandex stretch dart on sleeve opening provides a comfortable, tailored fit.

– Lightweight, welded cuff openings with Spandex darts to help maintain shape.

– Fade-resistant, sublimated panels and graphics.

If there is one thing that I am picky about in a jersey it is the arm length. I DO NOT like a long, baggy sleeve where it bunches up at the end, near my glove. That annoys the crap out of me and it creates for less airflow which gets you hot quicker when riding. I love the taped seams on the cuff because the taped seams keep their integrity and do not stretch out. The Trinity jersey also ventilates fairly well and is also more of an athletic cut fit, but not so tight where you see every little imperfection in your mid drift. The collar rides up a little high on your neck, but the material is soft enough that it doesn't annoy or chafe my skin. The Trinity jersey has a simple clean look and has the correct sizing. You will not ned to work about getting a larger sized jersey because it’s an athletic fit. It’s snug enough, but its stretch enough where you're comfortable on the machine! 

For $199.95 for the pant and $74.95 for the jersey it is right in that premium gear price range, but I like the fact that it’s durable and will not fall apart after a few rides. If you’re in the market for some athletic/performance fitting gear, the Answer Trinity pant and jersey is a viable option.

Shift MX Blue Label LE Pant And Jersey

I probably could start a Keefer Inc. Gear Testing website only. That’s how much I love testing and nitpicking all different types of motocross gear. I get a lot of gear through my doors here, but only a handful of those sets of gear I would actually purchase myself. When I received a set of Shift’s new Blue label LE gear I was excited to try it since I have never worn the Blue label stuff. Immediately when I went to pick it up I was shocked on how light the stuff was. It literally felt lighter than any other pant or jersey I have worn to date.

The Blue Label Limited Edition pant combines premium fabrics, advanced technology and a fresh new graphic. Shift designed the 3LUE (that’s how Shift spells it, but we are going with “Blue” in this test, ok?) Label pant specifically for their factory dudes, but wanted to pass down what they built for them on to us mere mortals. Built on a Cordura Stretch Nylon chassis, the pant is designed for mobility, an ultra-lightweight feel and durability. Not easy to do! Its main purpose is to create a streamlined fit for less drag and improved movement on the bike. The lower leg consists of an extremely lightweight and breathable Nylon/Elastane for comfort and breathability inside the boot. Taped interior seams reduce restriction and overall weight. 

The Blue Label Limited Edition jersey retains a streamlined fit and minimalistic wrist openings for reduced drag and restriction. It has a 4-way stretch upper torso and sleeves, so it virtually disappears while you're on the bike. For sweat management, the jersey features TruDri fibers and perforated sleeves, deigned so the rider can stay cool, dry and comfortable on the bike during long motos.

Now that you got the gist of what is going on with this stuff, let’s get to the nuts and bolts of this test….I am not going to sit here and tell you how great this stuff was right off the bat. Honestly, it took me a few times to appreciate what Shift has done with the Blue label pant and jersey. When I first put the Blue label pant and jersey on it literally felt like I was wearing almost nothing! It was a completely different feeling and weird sensation to me. I have worn Fox’s FlexAir gear, Thor’s PrimeFit, FXR’s Revo and Alpinestars Techstar stuff and nothing comes close to how light the Blue label pant and jersey feels on the body! It was also awkward how the Blue label pant’s zipper is set off to one side. There was nothing wrong with the way it was designed, it’s just an awkward way to zip up your pants when you have been zipping your pants up one way for 30 plus years. The Blue label pant has a snug, but very stretchy fit that allows you to really be mobile on the machine. The sizing is true to size and the waist is so stretchy that if you’re a size 33 you're good to go with a size 32 pant. The seams on the yolk of the pant are slightly annoying at first and take some time to get used to, but once you have put a few rides in, it becomes a natural feeling. You will feel the seams when you're sitting on the seat and that is what feels foreign to me. Usually the seams on other sets of pants aren't there or not noticeable while riding, but the Shift Blue label seams are noticeable right away. The yolk (or butt area) of the pant can pull down with pleated/gripper seats when accelerating out of corners so make sure to tighten the ratchet style belt snugly to combat this. The leather on the knee area of the Blue label pant is not only tough, but provides excellent grip against the machine. For how lightweight the Blue label pant is, it can take some abuse. For an athletic fit pant, it’s not so tight where you will have trouble with knee braces fitting inside. This pant stretches remarkably well and is very breathable on the track (more on all this in a moment). 

The Blue label jersey is thin and stretchier than any other jersey on the market today (minus the FlexAir jersey). The perforated sleeves are genius and I fell in love with the way the jersey fit on my body. The amount of air flow and breathability this jersey has is unreal. It’s tough to get a perforated sleeve that doesn't feel harsh or course on your body. I have worn plenty of perforated jerseys before and they chafe the crap out of my skin! The Blue label jersey’s sleeves are soft, pliable and fits sungly against your arms. I can’t begin to describe to you in this test how comfortable the sleeves are. The neck area has plenty of room and doesn't ride high up on your neck, yet doesn't let dirt inside the jersey very easily. As stretchy as the pants are I was shocked on how well the jersey stayed tucked in. I am not a big “No Tucks Given” kind of guy, so keeping ‘er’ all inside the pant is more my style and the Blue label jersey’s tail is long enough to stay “Tucks Given”. I also like the fact that the jersey accommodates underprotectors well and is stretchy enough to still feel comfortable. 

This jersey is so comfortable when riding. Perforated arms are a blessing. 

One thing I have never noticed before, until recently, is how much better I feel on the bike when I have an athletic, streamlined fit pant and jersey. The Shift Blue label gear is the most streamlined fit I have put on to date. Riding back to back on the same day (with other sets of gear) you are able to really feel less drag when hauling ass around the track. When scrubbing jumps or accelerating down the straights I am able to feel more aerodynamic with the Shift Blue label gear. I honestly thought the word “streamlined” when talking about motocross gear wasn't a big deal and kind of “gimmicky” until I actually rode several days back to back (with the Shift Blue label gear against other sets of gear). Now does that mean you’re willing to pay $229.95 for the pant and $89.95 for the jersey? If you’re a weekend warrior probably not! However, if you're a serious racer type and want the most out of each race, I personally would pay money for this set of gear. Shift makes a White label line that is much more affordable for the weekend warrior that isn't looking to spend over $300.00 on a set of gear. 

The seams on the yolk of the pant take some getting used to. 

“Hey Keefer what about durability for that price”? I am fairly abusive with gear and after several long test days wearing the Blue label stuff I can sit here and tell you it’s pretty damn impressive for how lightweight it is. Now you can’t go and hit trees and shit and expect the stuff not to rip. It will! If you're sticking to the motocross track and you’re the guy getting roosted in the middle of the pack, don't stress, it will hold up! The hinges on my knee braces have yet to wear the leather down after several hours of riding and the colorway is black so it stays looking decent for a longer duration of time. I am usually not a huge fan of a black colorway, but if you tie it in with some colorful boots and gloves it could make it pop some! 

The Blue label pants have held up extremely well for how light and thin they are. 

Overall, it took me a while to get used to how lightweight and thin the Blue label pant and jersey were, but once I went back to back against other sets of gear on a hot day, there was no way I was taking this stuff off. It was like an air conditioner on my body. Even if you're a bigger dude and not all “weiner and ribs” you can still look good in this set of gear! Don't be scared, try it, but be ready to spend some coin! 

If you have any questions about this set of gear please feel free to email me at kris@keeferinctesting.com.  

Alpinestars A-1 Roost Guard

You can see the Alpinestars A-1 peeking its way through my FXR jersey.

I am always looking for maximum flexibility when I ride and I am very picky about what goes under my jersey as far as protection. The Alpinestars A-1 Roost Guard has been around for a while, so I decided to test the crap out of it to see if I can live with having some protection under my jersey. As you may have read in an earlier chest pro review, my son gets on me about having some kind of protection on my body when I ride, so testing different guards has been an on going thing over here these days. 

Don’t get confused, as the A-1 is not your full on maximum protection chest protector. The A-1 Roost Guard is constructed of a poly material blend and is CE certified (front guard) against impacts and roost (the back shell is not CE certified). However the back shell is removable and the whole shell is completely perforated to allow airflow through to your body. The shoulder pads are removable and the A-1 comes in combined sizes M/L to XL/2XL. I ran the A-1 Roost Guard with the complete shell intact for a while and found it to be very comfortable under my jersey and not too hot. Although it is not the lightest under protector I have tried to date, its mobility won me over and allowed me to move freely on the bike without feeling like my upper torso was welded together.

Once I got used to the complete shell, I removed the shoulder pads and back shell and rode with it like this for several weeks. This quickly became my favorite set up as it almost felt like I didn’t have anything on under my jersey. Adjusting from full shell to front shell is very easy with the integrated Y-strap system. I was skeptical on the sizing I received (M/L), but the A-1 guard is extremely adjustable and fit snugly around my torso. The straps have been durable, do not stretch out easily and the clips are tough enough to stand a nice size crash. I have tested that as well! I also appreciated that the soft bio foam shoulder pads do not stick out or make your jersey protrude outward when riding. I mean come on, you have to look good too right?  I didn’t get as warm as I thought I would when wearing the A-1 protector, so I really had no excuse on why I couldn't wear it on every ride. Even though I am not the best candidate for “dress for the crash, not the ride”, I appreciate a good roost guard that offers flexibility and enough protection/roost deflection for my taste. At $119.95 the Alpinestars A-1 is a great buy with it’s multiple configurations and is comfortable enough for me to wear year round. It is my favorite under protector to date! You can order yours over at www.alpinestars.com and if you have any questions about this test please feel free to email me at kris@keeferinctsting.com. 

Stance Long Moto Socks

No, the Stance moto socks aren't going to change your life like some may claim, but they are pretty damn comfortable for moto socks. Your motocross or off-road socks usually are the one piece of your rider ensemble you don’t really think too much about, when throwing gear into your gear bag. With the evolution of knee braces, however, socks have evolved somewhat right? Remember the thick ass neon socks of the 90's? Yes, I use to wear those and would never wish that upon anyone ever in my life. Stance is a company strictly devoted to your feet and they are a very moto oriented company, so the stuff they offer has some moto "thought" behind it.

Stance offers short and long moto socks, but since it is starting to get hot and I wear knee braces, I wanted the long Stance motocross socks to put on my stinky size 10 feet (instead of the short sock, Asterisk or Leatt knee brace combo). The Stance socks have mesh panels that go up your leg for breathability, arch support and a reinforced toe/heel cushioning to combat holes. I will admit that the Stance socks are some of the softest- feeling socks I have put on and feel very cushiony inside my boots. The long mesh leg panels provide decent sweat resistance and the Lycra band at the top of the leg grips your thigh area firm enough for a nonslip grip. I have worn a pair of these Stance socks for more than a couple months and the elastic has held up well, only if you DO NOT DRY THEM! If you dry these suckers the elastic will stretch/sack out and lose their elasticity. Then what will happen is you’ll be pulling these suckers up all day inside your riding pants. 

For $38.00 a pair for socks it’s something that will only attract some. I have tried on other brands of socks with almost the same comfort for almost half the price. However, I will give it up to Stance for being a very durable sock! The socks I have been wearing for over two months (riding 4-5 times per week) have zero holes in them, which is rare for me. They do lose a little of their soft new like feel after several washes, but are thin enough so my feet aren't sweating all to hell. Mrs. Keefer can attest to the smell that comes out of my gear bag after a long day... She even commented that these socks don’t stink or feel as wet as some other socks I take off after a full day of motos. Yes, my wife washes my socks! I know, right? That's why I married her! 

So if you aren't into the Asterisk or Leatt knee brace pants and need a longer sock for knee braces, you can head over to stance.com and check out all the moto socks they have to offer. I only can afford a couple pair at a time, but if you’re a picky sock person these could be up your alley.

Asterisk Ultra Cell Knee Braces

Asterisk has been in the knee brace game for quite sometime and are one of the OG's when it comes to saving your knees (without a prescription). They are under new ownership and have been moving full steam ahead for a couple years now. Most of you know that I love the Asterisk’s ZeroG knee brace pant, but what about their knee braces? Well, I have put the Asterisk Ultra Cell’s through many motos and they have been basically an extension of my legs throughout several months of riding. The newest Ultra Cell version features four adjustable Velcro straps that are less bulky and way more comfortable than the older Cell’s. The knee cup system is almost seamless and leaves no gaps at all so you don’t have to worry about stabbing your knee with your handlebars (when you go deep into a corner). As you bend your knee, the upper and lower shields are revealed from beneath the patella cup, and as your leg is straightened, they move back into place behind the patella cup. The Asterisk Ultra Cell braces have a fully adjustable calf and thigh cuffs for a customized fit.

The floating knee hinge automatically aligns itself with your knee joint thus allowing it to fit on a wide range of leg and knee shapes. The Ultra Cell brace is one of the most low profile non prescription braces I have tried and it will not get snagged or caught on your riding pant liner (if you have a liner in your pants) if you're careful. If you want to be more careless when putting the braces on please go buy yourself a pair of Zero G pants. Trust me!  The knee joint hinges are rounded enough that they don’t tear my pants up after months of use. Before you ask, yes I do wear pants long enough to see if it wears holes in them so pump the brakes. I like that I can adjust the extension and flexion of the brace so that I can determine how much I want my leg to bend. 

The Ultra Cell comes with a patented boot tether system that securely attaches at the bottom of the brace to your riding boot, effectively making the boot and brace as one piece of equipment. To do this you must drill a small hole and install the other half of the strap-attached clip to your boot, plus cut a small hole in your pant leg. Yes, it’s kind of a pain, but worth it when considering how much more protection you get. When you do tether the brace up, the force will now be transferred from your boot, into the brace. Did I do this with every pair of pants I own? No, I didn’t, but I did notice a more secure feel when I got caught dragging my feet in sizable ruts. The comfort of the Ultra Cell’s are second to none and although I am not a huge fan of the Velcro strapping system on any brace, I am glad that Asterisk has the ZeroG pant to prevent the brace from moving around on my leg.

Call me crazy, but I thought the older lace up design held to my leg better than the Velcro strap system does. Sizing is important so make sure to measure your leg correctly by using a soft measuring tape and measure directly in the middle of your knee cap. I did encounter (with my large size brace) that I needed smaller (length) Velcro straps. If you do order direct (which you can) you might want to ask for a smaller sized Velcro strap set (just in case). 

The Ultra Cell knee braces have been on my legs for many days of riding and have performed well, but more importantly left me feeling safe. Does that mean it has prevented a knee injury from happening to me? Possibly, it’s tough to say. I don’t wear or trust knee guards to find that out so I stick to braces. Some riders swear by knee guards and usually it’s a matter of feel (bulkiness) on the bike for them. I however do not notice a very bulky feel, when squeezing the bike, with my legs, with the Asterisk Cell braces. At $699.00 the Asterisk Ultra Cell braces are a good preventative piece of protection that I will not go without. You can go to asterisk.com to purchase a set or you can call them directly at (951) 268-6790

Thor MX Prime Fit Pant And Jersey

When it comes to gear I am a complete madman! I am so finicky that it's sometimes hard to please my picky ass! The growing trend in today’s motocross world is athletic cut fitting motocross gear. I for one am a big fan of this type of gear, but I am also 6’0 and 170 pounds. As my wife would say I am all D&R! Bigger dudes come up to me and say “there’s no way I can wear that stuff because I am too large of a guy”. In some cases, yes, if you're 260 pounds, maybe the compression/athletic cut isn't for you, but that is why Thor makes other lines/sets of gear to choose from. If you’re a size 38/XXL I am telling you right now there is nothing wrong with getting some athletic cut gear. There is no shame in being comfortable and this gear is just that. Comfy! Thor’s Prime Fit is in my top three favorite sets of gear to wear in 2018, so let me break down why I like this stuff so much. 

Thor’s Prime Fit pant and jersey is an evolving concept that is built around a very lightweight, breathable athletic inspired chassis that allows for complete movement on the bike. Thor's Prime Fit jersey utilizes compression technology (in the sleeves) and moisture wicking away fabric to try and give the rider the lightest and most breathable jersey possible. The Prime Fit pant is made up of spandex and polyester, along with a generous amount of leather in the knee for grip. These combinations of fabric almost make you look down to check and see if you are wearing any pants at all. It's that light!

Thor’s Prime Fit Pant is true to size and once you put the pants on it almost feels like you’re not wearing anything at all. The knee area of the Prime Fit pant is very generous and accepts all types of knee braces and does not restrict movement whatsoever. I also like that the leather of the knee is very durable on the Prime Fit and withstands the abuse of knee brace hinges. The ratchet style front closure system and velcro adjustments make the pant snug enough so the yolk/rear of the pant doesn't slip down under acceleration. The pant conforms to your legs and stretches, yet doesn't feel like an “athletic cut” when moving around on the bike. The looks of the Prime Fit pant are more athletic than what it feels like when riding. Ventilation is superb and provides enough airflow for even the hottest of days. For how light and thin these pants are they have withstand some heavy abuse. Just note that this material doesn't like tree branches and will rip if you're an off-road guy. This is a more motocross style built pant. If you have a ribbed seat cover, that is fairly aggressive, the Prime Fit pant will wear out sooner (than other sets of pants) in the butt area. 

Thor’s Prime Fit Jersey feels and looks like an athletic cut jersey. It is tight around the whole upper part of your body, but not restrictive. The Free Flex four way stretch sleeves allow plenty of unrestricted movement and hugs your upper torso nicely. You will have to get used to the tighter compression feel on the sleeves when you ride however. This isn't a big issue, but if you're coming off of a standard cut jersey it can take a moto or three to get used to the feel. When it comes to ventilation the closer fit noticeably helps cooling, while the moisture wicking fabrics, ventilated mesh panels under the arms and on the back assist in this area as well. The combination of the close fit plus moisture wicking, ventilated materials make this jersey a complimentary piece to go with the Prime Fit pants. The jersey is true to size, but again it might take you a moto or so to get it stretched out enough to where you are comfortable. A new Prime Fit jersey can take a bit to “break in” much like a pair of boots. I love that the collar is soft, doesn't ride too high up on the neck, yet keeps dirt from going in between you and the fabric. The Prime Fit jersey stays tucked into the pants, so if you are a “no tucks given” kind rider look elsewhere or un-tuck the jersey yourself.  

The overall fit and looks of the Thor Prime Fit pant and jersey is some of the best stuff I have seen from a gear company in 2018. I am a fan of the performance and looks of this gear and I like that it can win a “Best Dressed” award on any given day. Not to mention the simple, clean colorways that Thor offers in this line of gear. The Prime Fit pant is $119.95, comes in sizes 28-38, the jersey is $59.95 and comes in sizes S-XXL. They have eight different colorways to choose from and I approve seven of those eight.  You can check out the complete line at www.thormx.com. 

If you have any questions about gear, you know that I got answers, so email me at kris@keeferinctesting.com.