On My Own Dime/Time (Fly EVO DST Gear)

If someone was to pull the rug out from underneath me today and I was left with nothing in my garage, what would I replenish to start my moto life once again. I mean let’s face it, some of you may still think because I get free products/bikes/etc. that I will tell you everything is great. Well in case this is your first time here at Keefer Inc. we don’t exactly do that kind of thing. What if I was just like you and had to buy all my own shit, just so I could go riding with my buddies on the weekend. Once a week for the rest of 2020, I will talk about a product(s) that I would go purchase with my own money because it’s that good. Here is our first installment of the 2020 O.M.O.D. 

It’s no secret that I am a huge believer in Fly Racing products. This is not to say that other gear manufacturers will not make the O.M.O.D list in 2020, but I thought it was fitting to start here. I am a gear snob and love a nice feeling set of gear so without further adieu, the first set of gear I am buying is a set of Fly Racing EVO DST. 

Although I love me some Fly Lite gear, my new love has come in the way of the EVO DST line. The EVO pant still has that slimming type of fit, but is still stretchy enough that my size 38 tester doesn’t feel bunched up when his fat roll jiggles a little bit when riding out of the pits. The EVO pant delivers a lightweight feel has an enough room in the waist area just in case your in between a size and is durable as hell! I previously only had a couple weeks in last year’s (2019) DST line and although the cut hasn’t changed in 2020/2021, to me it feels like there is less bunching in the knee area than in 2019. I like that the BOA is on the back of the pant still, as I can still easily get my pants on/off just in case I am super hydrated at a race. I mean when you’re at a race, with nerves flowing and your super hydrated, you will be visiting your favorite relief spot a few times. The EVO pant also stays secured to my waist via the BOA and for me it prevents the yolk of the pant from moving too much when accelerating out of corners hard on the seat. I know it’s not very common to get a lot of ventilation through a pant, but to me the Fly Racing EVO pant does a good job of giving enough air flow to surrounding regions that require some air conditioning. The leather on the knee area is tough enough to withstand my CTi knee brace hinges without eating a hole through them and they also DO NOT mark up my shrouds when squeezing the bike. To sum it up, I feel like I get a lot of comfort out of this pant when I am on the bike with a blend of durability.  

The EVO jersey is a key part to this equation here. I can’t have a great pant with a jersey that is rough against my skin, baggy or has an arm length that bunches up against my glove. The EVO DST jersey lays nicely over my shoulders and has a neck that doesn't ride up too high. Some jerseys ride too high up on my neck and end up chafing the back of my neck area, but the EVO doesn’t. The stretch and mobility that I get with the DST allows me to move around on the bike freely with enough air flow to make me happy in the summer months here in Southern California. Although it does have a Pro Fit, it’s still roomy enough for that XXL crowd as well. 

The Fly Racing EVO DST pant and jersey have great durability and has come a long way in the past few years. If you’re looking for durability with comfort, this line of gear could become your favorite rather quickly. If I had to replenish my gear bag with my own money a set or two of this gear would last me a season or two of riding without an issue. 

I am happy to put my money where my mouth is so the first three people to send me a copy of their receipt of their EVO DST pant/jersey order on RMATVMC.com through my banner right here on keeferinctesting.com will get fully refunded on their order! 

EVO DST PANT PRODUCT DETAILS: $199.95

DST (Durable Stretch Technology) constructed of four-way HEX-Stretch fabric provides excellent mobility with heavy-duty durability

Laser-cut perforations in key areas for advanced airflow

Strategically placed stretch-mesh ventilation areas

Relaxed leg cuffs

Exclusive four-way HEX-Stretch fabric construction is flexible and tough

Leather heat shield panels with DuPont™ Kevlar® stitching

Seat panel sewn to breathable light mesh reduces pulling

Advanced Lycra® liner adds increased comfort and performance

The Boa® System offers fast, on-the-fly micro adjustability

Ratcheting fly closure allows for adjustability

Ergonomically pre-shaped knee accommodates most knee braces and guards

Full-Floating durable 900D seat surrounded by HEX-Stretch material moves naturally with your body

Exclusive zipper lock system keeps pants closed and secure

JERSEY PRODUCT DETAILS: $59.95

Laser-cut perforations for advanced ventilation

Full mesh back and integrated mesh in key areas

Zero-cuff arm openings provide unrestrictive mobility, and a comfortable fit

Multi-directional Lycra® neck and shoulder panels

Low profile multi-panel construction for maximum performance and a comfortable fit

Seamless armpit construction, with a single-continuous stretch mesh panel from the sides to cuffs which helps prevents underarm rubbing and irritation

Silicone-printed tail keeps jersey tucked in

Pro fit: ergonomic arms created for riding position, with a slim cut

Fly Racing Patrol Jacket

By: Michael Allen

Winter is my favorite time of riding here in Southern California because the ground is moist and the traction is high, but contrary to what most of you east coasters think, the temperatures can drop down below freezing out here on the west coast. Unless you’re running a windproof jersey, most other jersey materials have some sort of ventilation incorporated into them so this makes it hard to keep your body at the optimal temperature all day long. The Fly Racing Patrol jacket comes in either grey or black and is offered in sizes small through triple extra-large. The jacket is made of a lightweight shell that is windproof, water resistant, and uses a breathable membrane material. All of the zippers (main, pocket, and sleeve) are high quality and use a seal to keep moisture out. There are two lower pockets in the front and two breast pockets that I found fit a cell phone perfectly while being easily accessible. Inside the lower back of the jacket there is also a large mesh pouch, which can be used for storing the sleeves when they aren’t being used.

The ability to easily turn this jacket into a vest is easily one of my favorite highlights about this product. The inside of the jacket is fleece, which is super comfortable and unlike a lot of other jackets the Patrol comes out of the box very flexible (sometimes new jackets are super stiff and need to be broken in). The Patrol is easily adjustable as the wrist cuffs use Velcro so they can be adjusted to the rider’s preference. The fit of the jacket isn’t too slim nor too loose, but can be adjusted at the bottom with a shock chord to better seal around your waist. The fact that the jacket isn’t super slim fitting is nice because I wear my chest protector under my jersey and I need some extra room in the torso area. Who doesn’t like to have a beer or two out on the trail with your buddies? I like to pack some beers with me occasionally when I go trail riding, so there is plenty of room under the jacket, without having to stretch the jacket out too much (in order to get it zipped). In fact there were times I put the jacket over my fanny pack and adjusted the draw string tight underneath the pack. On the other hand the fact that it’s not too baggy is nice because I often wear my hydration pack over the jacket and it fits very comfortably.

When it comes to Jackets the main thing I look for is practicality and ease of use. Ever since I first started wearing vests I have been in love with them and how they keep your core warm while not letting you overheat. The fact that the Patrol jacket doesn’t have 37 pockets is part of the beauty. The Patrol doesn’t need a pocket for every gadget in the world, I mean come on, I am just trying to go trail riding over here! There are just enough pockets to store all your basic needs, which for me were my cell phone (in the front left breast pocket), and a few gel packets (in the lower pockets). For longer rides and when I was planning to go alone, there was enough room for a Spot Tracker that is a must have for adventurists. The ability to easily zip off the sleeves with two zippers (per sleeve) and store them inside the jacket was super nice when everyone is waiting on you to do it quickly. The sleeves are a little trickier to zip back on, but once you get the hang of it, it’s pretty straight forward. Having the ability to adjust the wrist cuffs with Velcro is nice because I don’t like jackets that have tight elastic, which can seem too tight when the jacket is new, but can get clapped out when they get some time on them.

Although the jacket does ventilate well with the large vent in the back, I wish that there were a few zipper vents that could be opened or closed depending on the weather. Another thing I feel that the Patrol is missing is a slightly larger collar, or a collar that could be put up if it was super cold to protect your neck from the wind chill. The Patrol has become the jacket that stays in my gear bag and gets used almost every ride (even at the moto track on cold mornings). With an MSRP of $149.95 the Patrol jacket isn’t necessarily a steal, but I think it’s fairly priced for the quality of the jacket. So if you’re looking for a comfortable jacket that is simple and does everything well, give the Fly Racing Patrol jacket a look, or even better go to your local dealer and try one on. 

If you have any questions about the Fly Racing Patrol Jacket feel free to reach out to me at Michael@keeferinctesting.com. 

2020 Fly Racing Summer Camp

For 2019 Christmas morning came on July 24th. Why? Today I got to ride in the new FLY Racing 2020 line of gear and for those of you that know, this is a very big deal to me. FLY Racing has been putting on a “Summer Camp” to showcase their new 2020 racewear that will be available on August 1st. Fly Racing has been a huge supporter of the Pulp MX Show and The Keefer Tested Podcast and they kindly inited us to Boise, Idaho once again to try the new threads and also do fun other activities like white water rafting as well as some trail riding with Damon “Freakin” Bradshaw! 

Summer Camp kicked off on Tuesday night where FLY catered a dinner on the rooftop of a place called Jack’s Urban Meeting Place (JUMP) where we go to see the new line of FLY gear for the very first time. Riders like Andrew Short, Weston Peick, Damon Bradshaw and a host of media outlets were on hand to enjoy the festivities. The JUMP venue had a long slide that winded down five stories, but with dirt bikers that meant one thing… Who could get down the fastest. Racers will be racers. Slide times (AKA lap times) were on tap to see who could get down the quickest and most took the competition serious. I never did get the final results, but you can almost guarantee some sort of racing will find its way in the mix if there is enough downtime. Dinner, drinks, slides, desserts, and slide times go hand in hand.

Wednesday was designated the moto day as we got to spin some laps in the new gear at a facility called Skyline MX Park. When I pulled up to the facility it reminded me of a track that was on the Canadian Nationals for a while called Regina. It was muddy in the morning, turned tacky for a while, then went into straight hard pack mode in the the afternoon. FLY left gear bags full of new 2020 gear lined up for us media dorks plus had a fleet of motorcycles for us to ride. I am usually not a an all black kind of gear guy, but to my surprise, the all black/white/hi vis set of Lite Hydrogen that FLY put out for 2020 is sexy. Can I say sexy? Well I just did because I looked damn good and I felt damn good wearing the new colorway. I haven't spent a ton of time on the new FLY Formula helmet as of late, but after wearing it again (on this day) it made me realize how comfortable this helmet really is. It is super light weight, ventilates well, has a very plush liner/cheek pad feel, plus the looks are starting to grow on me. I mean let’s be real here… This set of gear that I had on today, along with the Husqvarna Rockstar Edition I was riding could have won some Best Dressed and Lit Kit awards. No lie… The BOA reel is Zach Osborne’s favorite thing in his life next to his family (just listen to his podcast) and the Lite Hydrogen along with the EVO line has the BOA incorporated into the pant. It works and I am huge fan of it as well. Maybe not as much as Zach, but it’s pretty damn good! 

The FLY gear line will be available to the public on August 1st and even though they didn't come out with an all white set of gear for 2020, I will have to say they did a damn good job with all the lines this year. The Kinetic line has a very clean blue and white set that I will be wearing for the 2020 YZ450F intro and the EVO DST line has a camo green that I am all in on with the KX250! None of the 2020 fit has changed, so if you have heard me talking about how well the gear fits on my podcast then you can guarantee the 2020 gear will be just as good. From big guys to D&R dudes, FLY Racing has a fit you will like! Trust me. 

Another bad ass thing that I witnessed was Damon “Freakin” Bradshaw wringing the shit out of his Gas Gas 250 two-stroke on the MX track. I usually pride myself on riding the most when we go to these type of events, but Damon had me handled by far. The dude absolutely hauls ass still, but more importantly, doesn't look like an old man doing it! He is smooth and moves around on the bike well. Weston Peick and Bradshaw were ripping around on the track at the end of the day and Bradshaw wasn't making it easy on Peick, let me tell you. This sparked up a debate with Matthes and I on what 90’s rider would be the fastest today if those riders were all on the same bike? Riders like Bradshaw, Dubach, Ward, Lechien, and Matasevich, RJ. Who would be the best? My money was on Dubach the night before, but that was before I saw Bradshaw ride the day after! Holy crap! The dude rails and still has that pissed off mentality when he rides! I Iove it! Off the track the guy is just chill and the most down to earth, mellow person I know. 

Tomorrow we head out to go white water rafting so say a prayer for me! Hope to see you guys in Washougal for the debut of the gear! 

Fly Racing Women's Lite Gear

Editors Note: Jeannine Labbe and I have emailed back and forth for sometime and she recently reached out to see if I would like a women’s opinion on a few things. As I take pride in being a well rounded testing site, I agreed to let her evaluate a set of Women’s gear for all you lady riders out there. I only gave her one condition however… She had to be brutally honest with her findings. Below is Jeannine’s honest review of the Fly Racing Women’s Lite set of gear.

By Jeannine Labbe:

Finding a high end set of women’s gear is hard to do. Finding a high end set of women’s gear with clean colorways (or even more than one) is nearly impossible. FLY Racing’s Women’s Lite racewear checks both boxes, so, when Keefer offered to let me do a review for Keefer, Inc. Testing, I jumped at the chance. 

After receiving the Women’s Lite gear in Blue/Hi-Vis, we headed out to Little Sahara State Park for a few days of riding in it. Little Sahara has nice mix of dunes and sand trails, so it afforded me the chance to see how the gear worked when riding at speed, when shifting positions on the bike for steep hills, when transitioning from standing to sitting and back again through the trails, and even how well gear holds up to running through bushes and tree branches. 

The first thing that I noticed after putting on the gear is that it is really comfortable. Like wearing a favorite set of soft pajamas comfortable. The materials are soft against the skin and the overall feeling is really light. I typically change out of my riding gear between rides, but kept the FLY Women’s Lite gear on all day just for this review. I’d put in on before our first ride of the day and not take it off until after sunset, well after our last ride, when the temps dropped into hoodie territory. I must also say that I’m also a huge fan on the clean lines and colors of this gear set. The subtle addition of the darker shades of blue on the front provides nice visual contrast while also providing some camouflage if your belly is not as flat as you might want it to be. 

The Women’s Lite jersey features multi-panel construction with raglan sleeves, a tag-less v-neck Lycra collar, an extended tail, mesh ventilation panels down the sides and the inside of the arms, shorty cuffs, and sublimated graphics. The sublimated FLY Racing graphic is well placed to not look weird across the bust line, as can happen when graphics don’t span most of the length of a shirt or jersey. The choice of hi-vis on the blue colorway for the mesh inserts provides a pop of color, but it has the downside of being like a highlighter for belly bulges.

FLY refers to the jersey’s fit as women’s pro-fit. It has a slimmer fit with a cut that complements a woman’s curves. The sizing is close to being spot on, but might run just a bit large. I’m 5’3”, 145 lbs, and carrying about 15 extra pounds of baby weight (despite the “baby” having just turned 4). I fall between a medium and large, a problem I frequently have in street clothes, too. The medium jersey fit, but showed off my extra curves, so I opted for a large. It’s a bit loose, but not baggy. If you are considering two sizes, I’d suggest going for the smaller size if you are trim or don’t mind showing some bulges and going for the larger size if you prefer to better hide your imperfections. The v-neck is small enough to keep most of the roost out, but large enough to not feel tight. Sleeve length was nearly perfect for me, so it could be a bit short if you have longer arms, particularly if you wear a smaller jersey.

The Women’s Lite pant features a lightweight minimalist design, a ventilated mesh liner, 90% stretch panel construction, pre-shaped knees, leather heat shields, adjustable waist belts, leg cuffs with a removable elastic band, and sublimated graphics. The knees have a low profile padding in them that should provide some abrasion resistance and resistance against knee braces rubbing through. I don’t wear knee braces, but the knees are roomy enough that you should be able to run them without them getting bound up in the pants. 

As with jersey, the pants run fairly true to size, but a tad on the large size. I wear a size 10 jean and they are typically a little loose. The 9/10 Women’s Lite pants are very loose. The 7/8 pants fit, but looked like yoga pants. Since I didn’t feel comfortable wearing bright blue yoga pants on a dirt bike, I opted for the 9/10. As with the jersey, if you are between sizes and on the thin side, you’ll probably want to opt for the smaller size. If you opt for a larger size, the side belts gives you the ability to really cinch down the waist. I love the waist belt design. The belts just pull forward and attach with Velcro. They are much faster and easier to use than the old style where you run the belt back and then pull them forward through a loop. Their soft and low profile design is much more comfortable when you lean over, too. The pants also feature my favorite motocross pant closure system of a zipper covered by a Velcro tab. It’s quick to use and low profile. The pants sit below the waist and are fairly short in the crotch. They come with removable hip pad that have large holes in them to allow maximum air flow. The pants have enough stretch that the pads do not affect the fit, but they do add odd looking bulges so I opted to not wear them. The interior of the waistband has silicone grips that grab well enough to be uncomfortable if you try to untuck your jersey between rides.

The pants feel very light. The leather heat shields feel heavy relative to the rest of the pants, but that feeling goes away when you put on boots, which support most of the weight. The mesh liner, which goes to the knees, is soft and comfortable and its hi-vis color actually shows through the pants, giving the top of the pants a slightly more yellow color than the jersey. The pant legs, with their slim fit, lightweight material at the back, and mesh at the front, fit very comfortably into my Alpinestars Tech 7 boots. With my short legs and large pants size, I did have to pull the pant legs up and hold them in place with my boots to get the knee in the correct area. This didn’t cause any comfort or performance issues, though.

The FLY Women’s Pro Lite glove is a minimalist glove with a perforated Clarino palm and heart-shaped silicone grips on the first two fingers. The material on the back is form-fitting, stretchy, and features the same light to dark color pattern as the jersey. Clarino material wraps around the back of the thumb and a Velcro closure allows you to tighten the fit around your wrist if needed.

The gloves are a bit difficult to pull on. The opening is small enough on my size 6 (small) gloves that the Velcro closure is redundant. The unpadded palm is a bit thick for my taste, but only because I have small hands and run small diameter grips or half waffle grips with the waffles removed. The thickness of the Clarino on the palms made the grips feel large and ultimately made my arms pump up. After fighting it for a couple half hour rides, I finally had to switch to my thinner Thor Void gloves. I wanted to get in more a durability test on the gloves, but needed to be able ride for more than a few minutes at a time. 

The pants/jersey retained their comfortable nature on the bike and they didn’t restrict movement. The sleeves of the jersey stayed in place without being tight around the wrists. The pants didn’t catch on the shrouds and didn’t pull when moving my legs forward or up, which I appreciated. My one gripe is that, after an hour or so of riding, the pants stretched out enough that they started to pull down a bit in back in situations where I slid back on the seat. My hips kept me from worrying about them actually falling down, but it was a bit annoying. However, even with the pants pulling down a bit, the jersey stayed nicely tucked in. This could be because the tail is long enough, or it could be product of me being very short-waisted and wearing a larger jersey. The leather heat shields on the interior of pant legs did their job to protect my legs from the hot head pipes the couple times that I low-sided and ended up under the bike. 

While the neckline was high enough to keep the roost out, the mesh inserts allowed in plenty of sand. It was windy out, so most of the sand might have from crosswinds rather than roost, but, regardless, I had a decent amount of sand on my back by the end of the day, which can be common with most jerseys. 

I was impressed by the ventilation of the gear. The temperature never got extremely hot, but I remained comfortable in nearly 80 degree weather. When riding at speed in a standing position, the pants flow a surprising amount of air. I usually ride in TLD GP Air pants with mesh inserts and the air flow was almost comparable. The jersey breathes well, but it doesn’t perform as well as the pants do when compared to a full mesh model. On the flip side, when the temps dropped into the low 60’s in the evening, I didn’t need to change jerseys or add a jacket as I often need to with fully vented gear.

Durability is mixed bag, though mostly good. I somehow got a snag on finger of one glove before I had even started riding. The mesh inserts of the jersey also snag easily. However, the pants and the rest of the jersey held up well to repeatedly brushing up against bushes on the trails. At one point, I even broke a 1” diameter branch with my forearm although my arm was scratched and bruised you can’t even tell that the jersey took a big hit. The pants and the non-mesh sections of the jersey don’t show any sign of the repeated bush strikes neither. Another minor issue is that the stitching has started to stretch out a bit on the sides of the knees and on the shoulders where my chest protector and my Camelbak hit. I don’t know that the jersey would have this issue without the Camlbak, so if you are just riding moto, you would likely not see the issue there. Regardless, it’s minor, but you can just see the stitches; they don’t appear to be pulling out.

Overall, I love the FLY Women’s Lite Racewear. It will be my new go to gear in all but the hottest and most humid weather. I hope to do a follow-up review on its long term durability and the hot weather performance. It could prove to even be my favorite hot weather gear.

The Women’s Lite pant retails for $149.95, the Women’s Lite jersey for $38.95, and the Women’s Pro Lite glove for $29.95. In addition to Blue/Hi-Vis, the gear is available in White/Black and Neon Pink/Black. Over the boot pants are available in White/Black and Neon Pink/Black for $114.95.

If you have any questions, get them to Keefer and I’ll be happy to answer them. And a special thanks to Kris and Keefer, Inc. Testing for giving me the opportunity to review the FLY Women’s Lite racewear.

Fly Racing Formula Helmet First Impression

I had the chance to head to Carlsbad last Thursday to check out the new Fly Formula helmet to get a tutorial by Dr. Dan Plant and the Fly Racing staff on the technology that is behind Fly’s new premium helmet lineup. I have had the chance to spend a couple days riding in the helmet (since Thursday) to give you an initial first impression on how it feels while riding. Here are “Ten Things” you must know about the Fly Formula helmet with AIS (Adaptive impact System). Stay tuned for a full long term review very soon over here on Pulpmx.com and Keeferinctesting.com.

1. Adaptive Impact System: The Adaptive Impact System (AIS) is a high-performance ecosystem of structural design and energy mitigating materials. Each layer of the AIS from RHEON enhanced Energy Cells, to the dual-density EPS liner, and the 12k carbon fiber shell, was carefully fine-tuned to achieve the goal of creating FLY’s highest performing helmet possible.

2. Energy Cells By Rheon: Impact Energy Cells were engineered by the FLY Racing design team specifically for the Formula. The seven strategically-placed cells in the EPS liner are designed to feel natural inside the helmet, resulting in a seamless fit for the rider. Their unique shape and maze-like structure allow the Impact Energy Cells to compress and shear. Each cell can either compress during a linear impact or shear during a rotational impact. This slight movement maximizes absorption of low speed linear and rotational impacts reducing overall brain stress. These energy cells are made of RHEON, an “active” strain-rate sensitive material that efficiently absorbs and dissipates energy as it deforms. Invented by Dr. Dan Plant, a mechanical and industrial design engineering expert based at the Imperial College of London, RHEON’s adaptive chemistry reacts instinctively to control energy and change its behavior depending on the severity or direction of an impact. Essentially, the RHEON Impact Energy Cells maximize absorption of low speed linear and rotational impacts.

3. Conehead Technology: Like a crumple zone, Conehead technology absorbs and dissipates impact forces more effectively than traditional EPS helmet liners. Created by physicist Don Morgan, Conehead technology uses cone shapes to pair a firm density EPS with a much lower density EPS. The result is more progressive energy absorption through a broader range of impact scenarios.

The Formula has six critical zones of Conehead EPS. Each zone has a uniquely fine-tuned combination of EPS densities to manage impacts specific to that region of the helmet. These specific multi-density EPS zones produce a much more progressive response to low speed and high-speed impacts. 

4.Expanded EPS Studies have shown that the majority of impacts occur on the forehead or side of the head. To help combat these impacts, the Formula development team incorporated lower density expanded volume EPS (thicker EPS) in these critical zones. This expanded volume EPS provides improved suspension for impacts.

5. 12K Carbon Fiber Shell And Control Release System Visor: The Formula’s first line of defense is an extremely strong and lightweight 12K carbon fiber shell. 12K carbon fiber refers to 12,000 carbon filaments per band. Carbon fiber is strongest when it is flat. Wider carbon fiber bands woven together produce a flatter result with less dips and rises inherent in a woven material. The reduction of these dips and rises creates less areas for resin to pool. Less resin equals less weight. The result is an extremely lightweight shell with superior penetration resistance to common 3K carbon fiber. Mounted on the front of the helmet is a durable yet flexible fracture resistant nylon visor. FLY’s own proprietary Control Release System secures the visor to the helmet but will allow it to release under certain types of impacts.

6.True Functional Ventilation (TFV): When in motion cool air is forced through multiple air intake vents. It then passes through vent channels in the EPS to collect the heat inside the helmet. Finally, the heat is literally sucked out through multiple exhaust vents. This suction is the result of a venturi effect created by the unique geometry of the helmet. The increased draw of air out of the rear of the helmet significantly boosts overall air movement and cooling.

7. Fitment/Comfort First Impression: After riding with the new Formula for a couple days I have come to feel that the fitment is a little snugger (near cheek area) than the F2, but the inside liner is much plusher inside. The pockets that surround the ears have a more dampened sound and the helmet isn't quite as loud as the F2. This is something you may or may not notice right away, as I didn't really notice it until I wore the F2 and Formula back to back. There are absolutely no hot spots on your head while wearing the Formula helmet through a long day of riding and I never felt like I needed to take it off. The Rheon energy cells sit on your head in a way that allows the helmet to almost wrap around the shape of your head better and not just get that “sit on top of it feel”.  

8: Ventilation First Impression: The ventilation of the Formula helmet is on par with the Alpinestars Supertech M10 as the ports are the most wide/open I have ever seen from an intake/exhaust port standpoint. When you look through the Formula helmet you can see daylight going through the helmet itself. Wearing it during my motos you can actually feel the airflow going through your head and keeping the Ari circulated. I didn't really notice this until my second moto when my head was damp with sweat, but as soon as this happened, I could feel the cooling sensation starting to work even better. 

9: Visor First Impression: I will have two say I am not a fan of the Formula helmet’s visor length and placement. The F2 also had this problem of where the visor sets itself  too high on the shell and the Formula has that same look. When pushing the visor down it leaves a gap and just doesn't look right. The short/high nature of the visor also makes it harder to see when the sun starts dipping down (I would know because I have been burning fuel until dark lately). FLY’s control release system on the visor is very cool and will not just come flying off if you take a spill because it actually has some tension on it. You will have to take the screw off and snap the recessed portion of the visor back in place, if it ever does come out. 

10: Weight Feeling First Impression: Coming in at 1290 grams the Formula feels light on your head when riding. I have grown to appreciate a lighter feeling helmet when riding as you don't really know how tired your neck muscles can get until you ride with a heavier helmet. I also like that it doesn't feel too light where i am wondering if this thing is even going to protect me when I fall. It’s light enough for me to appreciate the lack of weight, but I’m not scared of wearing a paper weight while pushing the limits on my bike. 

Fly Lite Hydrogen Gear Set

Having been a contributor for many years at a publication (that is now worthless) as well as testing with Kris over the last two years; it’s safe to say I’ve worn many different gear brands and styles. That being said, for some reason I had never worn anything from Fly Racing until last year when I got their Patrol jacket which quickly became my favorite off-road jackets/vests of all time. After telling Kris how much I liked the jacket he said I should try a set of their gear so I ordered up a pant, jersey, and set of gloves from their Lite Hydrogen line and patiently waited for it to arrive at my door step. 

Let me preface this review with the fact that although I ride a lot of moto with Kris, I also do a lot of trail riding as well as off-road racing, so I tend to really put sets of gear through the both sides of the fence. I got my set of red Lite Hydrogen gear and one of the first things I noticed when getting dressed was the fit. I’m a little picky when it comes to how gear fits as I don’t want the LBZ look, but at the same time I don’t necessarily have the figure of a super model, so skin tight gear is almost as bad as wearing baggies. The large jersey and 32” pants contoured my 6” 180 pound frame perfectly without making me suck in my beer belly (yes, I like beer, sorry Keefer). The jersey is slightly looser than the pant, which is fine with me because I like some air between my body and the jersey. This also allows me to wear my chest protector under the jersey without looking like a football player. The jersey has mesh ventilation panels, is laser cut, and has a slightly longer tail, so you don’t look like Jason Anderson when on the track. 

Having a slightly slimmer fitting pant is also fine with me because the fabric stays contoured without being too tight and uncomfortable. Being more form fitting also doesn’t leave any baggy material to get caught on shrouds or other parts of the bike which can impede your ability to feel comfortable on the bike. The pant material although having a contour fit seems to still be able to breathe and also has a very durable knee area, which hasn’t shown any signs of breaking down yet. One of the coolest features on the Lite Hydrogen pant is the BOA system, which gives you another way to keep the pants snug. It also kind of gives you that custom fit as everyone is made different right?  On the back of the pants, along the waist line, there is a BOA reel which can be clicked out and turned clockwise to tighten the waist of the pants. One off-road reason that I like this system is that when I wear my fanny pack (yes, I’m that guy) the extra adjustment lets me keep the pants tight so they don’t slowly fall down on a long trail ride. Boom! 

The Lite glove is a minimalist glove, which for me makes it very comfortable; although it’s no secret that minimalist gloves don’t provide the most protection off-road, it works out ok for me because I am a hand guard type of guy. The palm of the glove is made from perforated Clarino material and has a reinforced thumb area which have both lasted with no signs of tearing. On the top of the hands is a spandex material, which is very comfortable, but doesn’t protect from bush and shrub slaps when off-roading. 

I’ve been wearing this gear for a few months now and to be 100% honest it has been really good for both aspects of my riding! I only thought this gar would be good when I rode moto, but it has been great when I am hitting the trails as well. The only real downfall that I’ve found is the lack of protection of the back of the glove. That being said, the gloves were never meant to be off-road gloves (Fly makes a whole line of glove options for any discipline you may ride).  With the price breaking down as follows: Jersey-$49.95, Pant- $169.95, Gloves- $21.95, I think the Lite Hydrogen gear set is a great value for the hard earned dollar that you’re going to spend. If you have any more questions about the Fly Light Hydrogen gear, feel free to reach out to me at Michael@keeferinctesting.com.