Yoshimura RS-12 Full Stainless System (2022 Honda CRF250R)

The 2022 Honda CRF250R is a hot commodity and an aftermarket muffler is even hotter. With COVID-19 wreaking havoc on supply, new muffler systems have been a little slow to get released to the consumer. The Yoshimura RS-12 for the 22 CRF250R should be in stock by the time you read this so let’s compile some notes and talk about some points about the new RS-12 system, before you make a 1000.00 purchase on a aftermarket muffler shall we? 

Install:

Installing the new full system took me less than 20 minutes and the instructions were very detailed. All of the parts that came inside the box fit perfectly and it was easy enough that my 15 year old son installed it! In my opinion, Yoshimura is one of the highest quality exhaust manufacturers in the industry. I have been a part of a few R&D departments and I can tell you first hand that the quality, fit and finish of a Yoshimura exhaust is impressive. I wanted the stainless full system because it was less expensive ($909.00) but is a little heavier than the stock muffler system by just over a pound. I didn’t care about weight as much as performance so stainless is fine with me! 

On The Track:

Now to the part that everyone wants to know...Does the Yoshimura help the little red screamer? The simple answer is yes, but who likes simple answers? Not us! With the stock system, the 22 CRF250R pulled nicely bottom to mid-range, but lacked some top end and over-rev. When trying to grunt up obstacles, the engine still needs some help, but the 22 CRF250R is much better than the 21 in this department. This had Yoshimura rethink their RS-12 for 22 and came in with a spec that keeps most of that bottom end/low RPM responds but added mid range meat and top end pulling power. With the stock muffler the Honda still liked to be ridden a gear lower at times in corners (than other 250F machines), and if I didn’t, it took a bit of clutch feathering and more shifting to get the bike pulling hard again.

As soon as I fired the bike up with the new RS-12 exhaust it was clearly a bit louder, not obnoxious, but a nice, throaty sound that was deeper and less raspy than the stock muffler. I tested the stock system back to back with the Yoshimura system on the same days, so it was cool to see the places on each track where the bike really felt different. The most noticeable place the bike felt better was exiting out of corners while accelerating out of tight inside ruts. With the stock system I had to slightly slip the clutch and pay attention more to my RPM’s, all the way up the lip (If there was a jump out of a corner). When I bolted on the Yoshimura system I could leave it in second gear and just use the meat of the new found Yoshimura power to pull me up and over those types of jumps. Some areas of the track I had to be in second gear and then immediately shift into third with the stock system. With the Yoshimura system I could now be in second gear and let it pull that gear longer rather than having to shift. The Yoshimura RS-12 can also recover quicker if you’re in too high of a gear through corners. The RS-12 picks up quicker and makes the bike feel a little lighter through the mid-range. On soft berms the RS-12 allows the rider to stay on top of the soft stuff better than the stock system because of that quicker rev feel. From mid to top end is where you will notice the big difference between the RS-12 and the stock system. You’re able to pull each gear longer and with a harder feeling pull when making that shift. I would even venture to say that the mid rpm response is slightly crisper when in third gear not to mention that recovery feel in third gear through deep corners is notable right away. Bolting on the Yoshimura RS-12 full system will not make your Honda more responsive down low, but I appreciate that it didn’t complete kill that newfound low end that Honda needed for 22. The best part is that the Yoshimura muffler looks much cooler than the stock ones and sounds ten time better. 

 If you have a 2022 Honda CRF250R and feel like you’d like a bit more mid-top end power, I’d definitely look into the RS-12 stainless system. Yoshimura offers three options, the slip on mufflers ($719.00), the full stainless system ($949.00), and the full titanium system ($1259.00). Admittedly none of these are super inexpensive options, but it’s one of the few things in today’s four-stroke world that can provide a true bolt on benefit. 

Yoshimura RS-12 Stainless Muffler System (2021 Kawasaki KX450)

The stock 2021 Kawasaki KX450 is pretty damn good machine, but that muffler looks atrocious right? We called up on Yoshimura to see if we can get a more attractive aftermarket muffler system that is actually better than the stock system. I will say that the stock KX450 muffler system works pretty damn well, but as always we are constantly looking to try aftermarket pieces because as we all know, you are only as good as what you try! 

The Yoshimura RS-12 Stainless System is made in the USA, is rubber mounted to the subframe, its asymmetrical shaped muffler allows maximum capacity and incorporates a resonance chamber for managing sound and increasing usable power, the unique shape also provides more clearance for tire and brake caliper, has a new patent pending Precision Taper Fit (PTF) insert ring that can make it easy for the consumer to install and remove sound inserts as well as spark arresters, comes with a carbon fiber end cap and can be fully rebuilt with repacking kits that Yoshimura sells. If you’re looking to lose a little weight with the muffler, you will have to look towards the titanium system. The stainless system weighs in at 9.12 pounds, which is slightly heavier than the stock muffler, that comes in at 9.1 pounds. We aren’t necessarily looking to lose weight in this instance, as power, sound and reliability are more important to us with this unit. 

The stock muffler system is pretty damn good, as the power character of the KX450 is long and linear, but the stock KX450’s engine character could use a little more pulling power and more mid rpm response. Installing the Yosh RS-12 was painless enough and we really appreciated the rubber sub-frame mount that the Yosh muffler comes with. Having a rubber mounted rear muffler mount helps avoid the sub frame tab breaking off due to solid mounting. Once on the RS-12 is visually still big looking, but the RS-12’s exhaust note is so much better to the ears that we lost focus on how big the RS-12 looks. Out on the track we noticed how much easier the KX was to corners because there was less on/off feel from the engine on low RPM because the Yosh builds power a little more smoothly between 5000-7000 RPM. The RS-12 is less touchy to the riders throttle hand and to me that helped calm the chassis down in area 2-3 of corners. You will not get as much throttle response from the RS-12 as you do a FMF or a stock system, but to me this is a good thing. The mid range pulling power is what you will come to love from the Yosh system. Pulling power out of corners is noticeably better than stock and the rider can shift into third earlier without having to use the clutch in order to get the engine to recover (back into the meat of the power). Rear wheel traction was also an improvement on hard pack tracks as the KX450 had a better second gear flat corner sensation to the rear wheel than the stock system. Top end feels as good as stock with maybe a little more over-rev, so if you’re a little lazy the RS-12 can help you slightly in that area as well. 

If you’re looking for a more explosive rpm response from your KX450, the RS-12 may not be the muffler you want to go with, but if you want added pulling power out of corners as well as more rear wheel traction with a better exhaust note, then this Yoshimura RS-12 stainless system for your KX450 is a great buy. The benefit about stainless steel is that the overall construction of the muffler will last longer than titanium. Most of my practice bikes over time had stainless systems on it for the sake of durability. Slip fit titanium joints just don’t last as long as stainless. For $850.00, the RS-12 system is a good buy with quality construction that you expect from Yoshimura.