protection

Works Connection Titan Skid Plate

Written/Tested By Michael Allen:

Any dirt bike (be it off-road or motocross) should come stock with a skid plate. Some people may say that for motocross it’s not necessary to have one because there aren’t big rocks and hazards, but I feel that having a skid plate is cheap insurance for the under carriage of your engine. I’ve had the 2019 YZ 250F for quite a few months now and have felt a little vulnerable at times on the trail and have been sick of pressure washing off baked mud from the bottom of the engine when riding moto. After doing some skid plate research, I reached out to Works Connection to get one of their Titan skid plates to see if it would help my psyche. One of the cool things about Works Connection is that they make three different styles of skid plates for most models. They make an aluminum glide plate, an extended coverage aluminum skid plate, and a composite (like a good plastic) Titan skid plate. Over the past few years I have come to really like composite skid plates because they seem to be quieter than aluminum when roost/rocks hit them and also glance off obstacles smoother than aluminum. When I received the Titan skid plate it came with all the necessary hardware to mount it to the front of the frame (a clamp and bolts) and a bolt to mount it to an existing hole towards the rear. 

IMG_5100.jpg

The rear bolt is very easy to install because the threaded hole is already in the frame, but make sure you do this first because it helps hold the skid plate in place while the front clamp is being installed. Once installed it was clear how much protection this skid plate offers, covering both side cases, the water pump and the lower radiator hose. There are a few drain/breather holes in the bottom of the skid plate so debris doesn’t get stuck between the engine and the skid plate. I have used the Titan skid plate for a couple months now and haven’t had any on track/trail problems; in fact it has come in quite handy on a couple trail rides (with my buddies) that turned into a dick measuring contest up rocky washes. The added coverage is a plus for protection and the fact that the mud doesn’t cake on the engine makes washing the bike that much easier. Work smarter not harder they say, right? Composite skid plates also have more flex than aluminum, which is good because it lets the chassis work as it should when hitting bumps/obstacles.

IMG_5096.jpg

There were only two slight negatives when it came to the Titan skid plate. The first being that the front clamp mount, even when tight, doesn’t hold the skid plate super snug. The bolts bottom out, but the distance between the clamp arms and the skid plate is still slightly too large and lets the skid plate float somewhat (the skid plate is still snug, just not super clamped down). Being that the bolts are tight and the skid plate has nowhere to go, this isn’t an issue with a possible failure, but it was just something I wanted to mention in case you were installing and noticed the same thing. The second small issue was that the top front corner of the skid plate touches the bottom of the right radiator. Once again this isn’t a performance issue, but it was just something I noticed. 

IMG_5097.jpg

With all this information factoring in I think that the Titan skid plate is a great option when it comes to protection. Some people are stuck in the old world of thinking that aluminum is the only option these days, but if I can evolve to composite so can you! With an MSRP of $99.95 the Titan skid plate is a great buy for the quality and the amount of protection it offers you on the track or trail. If you have any questions about the Works Connection Titan skid plate feel free to reach out to me at Michael@keeferinctesting.com.   





Acerbis Footpeg Protectors



Have you ever been ripping ruts or laying it over in a corner only to find that your footpegs are stuck upwards? You either spend the next straight slamming down on the peg (with your boot) or maybe you find yourself pulling off of the track to get the dirt out between your return pedal spring/pegs. Yes, it’s a pain in the ass and some bikes are worse than others (like the Honda CRF450R). Well, Acerbis has been making these rubber footpeg protectors for sometime, but a lot of you may not know about them. 

IMG_2402.jpg

Constructed of EPDM 40 rubber, the Acerbis footpeg covers are designed to keep dirt out of your footpeg/return spring area so that the pegs can return properly once you bury it into a rut/corner. The installation takes some patience, but once you manage to spread the rubber around the peg and onto the footpeg mount/spring area, you can position it so that it is tucked up in there neatly. 

IMG_2399.jpg

The Honda CRF250R/450R collects the most mud/debris in the footpeg area and I frankly got sick of trying to stomp down my pegs after I have ripped a deep rut. The Acerbis rubber protectors kept the dirt out of the footpeg springs throughout each moto and I never once had to worry about getting my footpegs hung up. The rubber is fairly durable and can withstand some abuse of rocks, sand, and the occasional strong power washes. I have only ripped one rubber protector (at Glen Helen) on a rock and although it sliced the bottom of the rubber, it still held onto the peg and did its job for the rest of the day. 


For around $20.00 I would keep a couple sets of these Acerbis footpeg protectors handy in the tool box for early morning motos or just leave them on 24/7. The Acerbis footpeg protectors fit all modern Honda, Suzuki, Yamaha, KTM, Husqvarna, and Kawasaki dirt bikes. You can get these at rockymountainatvmc.com or acerbis.com